chinese supplier scrap tyre recycling production line,tire recycling machine line
USD $40,000 - $70,000 /Set
Min.Order:1 Set
Qingdao Eenor Trading Co., Ltd.
chinese supplier scrap tyre recycling production line,tire recycling machine line
GENERAL
This production line including main machine and accessorial equipment, it is used for producing ruwaste Tire Recycling Line/used Tyre Recycling Machine/scrap Tire Recycling plant for sale bber powder from waste tyre, and at the same time . Separate the steel wire and fiber.
1. This production line including the below machines:
No | Name | model | number |
1 | Ring cutter | QQJ-20 | 1 |
2 | Loop machine | YQJ-285 | 1 |
3 | Strip cutter | QTJ-380 | 1 |
4 | Block cutter | QKJ-45 | 1 |
5 | Tyre crusher | XKP560 | 1 |
6 | Big conveyor equipment | BCL-8 | 1 |
7 | Small conveyor equipment | BCL-3 | 1 |
8 | Big Magnet separator | BMS22 | 1 |
9 | Small Magnet separator | SMS-1 | 1 |
10 | Big Shaking screen | BSS-8 | 1 |
11 | Small Shaking screen | SSS-3 | 1 |
12 | Fiber separator | FS110 | 1 |
Remarks:
1. The above quotation is subject to buyer's confirmation within 30 days from the quotation date.
2. Warranty: one year quality guarantee
2. Analysis for output and Energy consumption
NO | Model | XKP560waste tyre recycling line |
1 | Energy consumption | 114.7 KW |
2 | Worker | 4-6 |
3 | Floor area | 300 SQ.M |
4 | Output | About 500 kg/h for 5-30mesh |
3.Process Flow:
Waste tire--Ring cutter --Strips cutter--Rim cutter --Crushing machine--Finished products.
1.ring cutter
Usage:
1. It will cut the whole tire into sidewall of tire and inner circle.
2. Easy to operate and safety.
Structural principle:
1. The device consists of frame, motor, reducer, transmission, supporting frames, knife, tools and other components.
2. Knife is made from alloy and hard waer-resisting.
3. Motor and reducer connected by coupling, compact structure, simple operation, easy maintenance.
Function: It will separate the sidewall from the top of tire's connection, so that tire sidewall and the top are completely separated.
|
2.steel wire separator
Usage:
1. It will separate the steel and rubber from tire circle mouth parts.
Structural principle :
1. The device consists of frame, motor, reducer, transmission mechanism, communication and regulation of body roll and so on.
2. Ditch is made of alloy, roll, hard wear resistant, can be used repeatedly surfacing repair.
3. This equipment has simple structure, high efficiency, low energy consumption, strong practical, easy operation, and safet
|
2.strips cutter
Usage :
1. It can cut all kind of tires, rubber sheets into strips.
Structural principle:
1. This equipment mainly consists of two blades, motor and reducer, frame and transmission mechanism etc.
2. Knife with special materials, hard wear-resisting, can relapse grinding use.
3. This equipment shear force, low energy consumption, uses a low speed, easy operation, safety.
|
3.rim cutter
Function: 1. It will cut sidewall into wide of strips is 3-5 cm, and tire circle reserved. Rim cutter:
Usage: 1. It will cut the 3-5cm strips into 3.5cm tire block.
Structural principle :
1. The device consists of frame, motor, transmission mechanism, balance equipment, two move knives and a fixed knife, and the compression gear etc.
2. Knife is made from alloy, hard wear resistant, can be used after repeatedly grinding.
3. Uniform speed of the device, shear force, low energy consumption, easy operation and safety.
|
5. Big conveyor equipment
To conveyor the rubber block into crusher.
6. tyre crusher (bearing bush)
Item | XKP560 |
Diameter of front roll(mm) | 560(smooth) |
Diameter of back roll(mm) | 510(groove) |
Working length(mm) | 800 |
Linear speed of front rollm/min) | 25.56 |
|
|
Ratio | 1:1.30 |
MAX gap(mm) | 15 |
Motor power(kw) | 75 |
Dimension (l*w*h)(mm) | 5070*2290*1980 |
Weight (kg) | 19000 |
Purpose: Crush the rubber block into rubber powder and granule.
7. big Shaking screen
Purpose:
(1) separate the rubber granule and powder, Resend the granule to crusher, and send powder to Magnet separator through small conveyor belt.
(2) separate the textile cord from rubber powder
8. Small conveyor equipment
9. Big Magnet separator
purpose: separate the steel small block from the rubber powder.
10.Small shaking screen
11.Small magnet separator
12. Fiber separator
13. Fine grinder
Model :FS110
capacity:200-500kg/h
Motor power:5.5kw
dimension:1.5*1.5*3.4(m)
weight:about 1.5T