Specifications

18W Milky cover SMD3014 all in one T8 led tube light
1.LED:SMD3014
2.G13 Base
3.Lifespan>50,000h
4.CE&RoHS approval

18W Milky cover SMD3014 all in one T8 led tube light

Model NO.:	ZC-T8-18W
Shape:	Straight
Shade Material:	PC
Lamp Holder/Base:	G13
Shell Type:	Frosted
Certification:	CE
Color Temperature:	Nature White
LED Chips:	Epistar
Input Voltage:	AC85-265V
Power:	18W
Export Markets:	Global

 

Parameter of CE&RoHS approval t8 led tube:

physcial Specifications:

LED Source	SMD3014
LED Chip	Epistar
LED Quantity	176pcs
Holder	G13
Material	Aluminum+PC cover
Dimension	Φ26*1200mm
Lifespan	>50,000 hours

 Electrical Specifications:

Input Voltage	AC85-265V
Wattage	20W
Power Factor	>0.9
Power Efficiency	>90%
Running Frequency	50-60Hz

Optical Specifications:

Luminous Flux	1936lm
Light Efficiency	100lm/w
Color Rendering Index(CRI)	80Ra
Beam Angle	120°
Working Temperature	-20°C~56°C
Color Temperature	2700-3500k Warm White
	4000-4500k Neutral White
	5000-7000k Pure White

Paking Specifications:

Inner Packing	cylinder paper box
Carton Size	124*20*24cm
Quantity per Carton	30pcs/ctn
Net Weight(N.W)	350g
Gross Weight(G.W)	550g

 

Advantages of led tube:

1. The design of this led tube without Mercury and Plumbum which make the product more safe and more reliable.

2. Using SMD3014 of Taiwan Epistar original LEDs,high brightness, low light attenuation, solid cold light source, epoxy sealing heat.

3.Using imported good quality aluminum material for better heat dissipation and maintaining long life span.

4. Nice PC cover with good light transmission, ensuring 90% light transmittance, transparent and frosted PC cover are available.

5.CRI(standard products)>70Ra, it can be more than 80 if required.

 

Product photoes:

Quality Control:
100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test its temperature after 24 hours’ lighting.
Then after it is cool we again test 100% of the lamps to see if it still work well . Each lamp should pass all these QC procedures before shipping to customer.

The luminous effect:

 

Installations:

Attention:1.If the conventional tube is with electronic ballast,please take off the ballast and make replacement with LED tube according to the

                  circuit diagram.

                 2.If the conventional tube is with inductive ballast,please take off the ballast and starter,then make replacement with LED tube.             

 

Any Further Questions:

How much can I save if I switch to T8 LED Tube Lights?

As an example, the brightness from our 8W LED tube equals to 25W fluorescent tube light. On a simple calculation, you can save 68% straightaway from the low energy consumption side.
Also the led tube light’s lifespan is 50,000 hours which is five times the lifespan of normal fluorescent tubes. So cost wise, you can save 80%.
There is also lowered maintenance cost, which means you don’t have to replace the tube light in 17 years if you use them 8 hours a day.

How can I replace an T8 LED Tube Light? Is it straight forward?

Unfortunately for most LED Tube Lights, you will need to make some changes to the current tube light fixture. But it’s very simple, and should just take at most 10 minutes for a qualified electrician to make the change.
See the picture below for a guide

Are there any other benefits of T8 LED Tube Lights other than energy saving?

Yes, one biggest advantage of led tube light is that there is no flickering. After hours of hours of working under LED Tube Light, you won’t get headache. Also, there is no UV emission, no buzzing of the ballast. You can enjoy a quiet setting where LED Tube Lights are used. LED Tube Lights are totally green energy with lighting fixtures of no hazardous elements like mercury or lead. All our LED Tube Lights are RoHS certified. For all the LED Lights, it’s instant on when turned off, there is no warming up period.

 

Package:

 

Trade Terms:

 

Applications:

1. hotel.

 

 

 

 

 

 

 

Certificate: