Product Details

high quality steel welded gabion box wire fencing

Details of gabion box

♦Material :Galvanized wire,stainless steel wire

♦Connect term :by Helical wire,by U post,H post

Nominal Box sizes ( m)	No. of diaphragms (no.)	Capacity per box (m3)
1.0 × 1.0 × 0.5	Nil	0.50
1.0 × 1.0 × 1.0	Nil	1.00
1.5 × 1.0 × 0.5	Nil	0.75
1.5 × 1.0 × 1.0	Nil	1.50
2.0 × 1.0 × 0.5	1	1.00
2.0 × 1.0 × 1.0	1	2.00
3.0 × 1.0 × 0.5	2	1.50
3.0 × 1.0 × 1.0	2	3.00
4.0 × 1.0 × 0.5	3	2.00
4.0 × 1.0 × 1.0	3	4.00

Welded gabion box advantages:

♦Blends easily and harmoniously with the natural surroundings.

♦Low cost alternative to concrete or masonry structures.

♦Very high resistance to natural forces due to better tensile strength.

♦Can withstand any unpredictable movement or settlement without loss of stability.

♦Simple and speedy installation, making it cost effective.

♦Quality finish and appearance is more aesthetically pleasing.

♦More rigid than woven mesh resulting in a more uniform finish when built.

♦Quicker and cheaper to install than Woven Mesh gabions because no pre-stretching required.

♦Special gabions sizes and mesh such as gabions with 4mm front mesh and 3mm mesh else can be available.

How to install welded gabion box?
♦1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
♦ 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
♦3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
♦4. Gabion box filled with graded stone by hand or with a shovel.
♦5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
♦ 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones.