alkali resistant fiberglass mesh
USD $10.00 - $10.00 /Square Meter
Min.Order:100 Square Meters
Anping County Yuanyu Wire Mesh Co., Ltd.
fiberglass mesh
(Teflon) open mesh belts are used in screen printing to transport imprinted materials through drying ovens and cooling chambers. These belts are long lasting and perform well over a wide range of operating temperatures.
Fiberflon belt fabrication department can supply a wide variety of splices and edge reinforcements in order to respond customer’s specific applications.
Properties:
1. Outstanding temperature resistance (from -170ºC to +260ºC)
2. Resistant to corrosive agents
3. Low thermal mass
4. Controlled porosity
5. Superior non-stick surface, easy to clean
6. High dielectric strength
7. Dimensional stability
8. Resistance to UV, IR and HF
9. Non-toxic
10. Superior tracking
Styles and Specifications:
Item | Mesh Size | material | Thickness | Weight | Temperature resistance | Max Width | Tensile Strength |
RD6001 | 1x1mm | fiberglass | 0.5mm | 370g/m² | -70-260°C | 4000mm | 310/290N/cm |
RD6002 | 2x2mm | fiberglass | 0.7mm | 450g/m² | -70-260°C | 4000mm | 350/310N/cm |
RD6003 | 4x4mm | fiberglass | 1.0mm | 400g/m² | -70-260°C | 4000mm | 390/320N/cm |
RD6004 | 4x4mm | fiberglass | 1.0mm | 450g/m² | -70-260°C | 4000mm | 390/320N/cm |
RD6007 | 4x4mm | Kevlar + fiberglass | 1.2mm | 600g/m² | -70-260°C | 4000mm | 895/370N/cm |
RD6008 | 4x4mm | fiberglass | 1.2mm | 580g/m² | -70-260°C | 4000mm | 560/360N/cm |
RD6010 | 4x4mm | Kevlar | 1.0mm | 500g/m² | -70-260°C | 4000mm | 900/600N/cm |
RD6012 | 4x4mm | fiberglass | 1.0mm | 550g/m² | -70-260°C | 4000mm | 395/370N/cm |
RD6013 | 10x10mm | fiberglass | 1.0mm | 450g/m² | -70-260°C | 4000mm | 360/300N/cm |
RD6014 | 0.5x1mm | fiberglass | 0.5mm | 420g/m² | -70-260°C | 4000mm | 310/290N/cm |
RD6015 | 2x2.5mm | fiberglass | 0.9mm | 600g/m² | -70-260°C | 4000mm | 390/320N/cm |