Performance

KDW-1608 is one-component neutral thermal conductive rubber, which is cured from the outside to the inside by absorbing moisture in the air. It could be used in all kinds of electronic products of thermal conductivity and adhesion. It has excellent electrical insulation property, dampproof, anticorona, the function of cushion, and good high and low temperature resistance performance, temperature resistance range is -60~+260℃. The product is non-toxic, which has excellent aging resistance performance and long service life. It could be long-term used in indoor and outdoor products of adhesion, sealing, waterproofing and insulation protection.

Application

1. Household appliances, electronic components of adhesion and heat dissipation
2. Power supply and control module
3. LED lamps of adhesion and heat dissipation, etc. 

Feature

1. One-component dealcoholization condensation silicone sealant
2. Paste, easy to process, strong maneuverability
3. Low shrinkage rate, no corrosion, no stress
4. Excellent high temperature electrical insulation and stability
5. Excellent  thermal conductivity 

Packing

Plastic pipe, 330ml, 25/package;
also could be customized.

Storage and transportation

1. Avoid light and heat, keep ventilation and dry (could be transported and stored as non-dangerous goods )
2. The shelf life would be 10 months in 25℃. 

Operation process

1. Clean the surface: clean the surface of adherend or coated object, remove rust, dirt and greasy dirt, etc. (dirt and greasy dirt would affect adhesion performance)
2. Sizing: use knife to cut the head of plastic pipe, put on long nose, extrude the adhesive on clean surface, and fix the adherend.
3. Curing: put the adhesive units in the air, whether it is completely cured is depending on the thickness. (2mm thickness, 25℃, 50% humidity, could be completely cured after 24 hours )
4. Notes: Seal and store the remaining sealant immediately after use. Remove the crust on the head when using again, which would not affect normal working.