Specifications

1)Speed Blister Packing Machine
2)High Speed High Output
3)PVC-Alu Blister Packs
4)Suitable for tablets capsules lozenges

FEATURES

Ø HIGH SPEED, HIGH PRODUCTION, COST EFFECTIVE

Ø COMBI PACKS for better utilization of capacity and packaging materials

Ø EDGE – TO – EDGE CUTTING to eliminate trim waste between packs

Ø SPECIAL TOOL DESIGN reduces trim waste

Ø CONTINUOUS BLISTER FORMING at low temperature by contact heating system

Ø ALL CHANGE OVER PARTS and adjustments accessible FROM FRONT SIDE

Ø EASY AND QUICK CHANGE OVER reduces material wastage and down time

Ø SIMPLER OPERATION Reduces operator fatigue – increases output

Ø COMPACT – occupies less floor space

Ø BUILT-IN WATER CHILLER facilitates easier operation

Ø EXTENDED GUIDE TRACK can accommodate upto four feeders to produce multi-product kit packs

  

 

• BLISTRIP - Ixt  and  BLISTRIP - II are automatic blister packing machines mainly utilised for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs. 
• The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
• The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output of 150 packs per minute for BLISTRIP - Ixt or  300 packs per minute for BLISTRIP - II can be optimally achieved.
• The packing materials namely PVC film and the lidding material namely Aluminum foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. 
• The blister packs which are punched out from main web can either be collected in bins or transferred over a conveyor belt for further handling. 
• The trim waste is sheared off in small pieces to allow easy disposal.

 

 

TECHNICAL SPECIFICATIONS:

		BLISTRIP-Ixt	BLISTRIP-II
BASE MATERIAL: MAX WIDTH: (PVC / PVC-PVDC / PE-PVDC) 0.2 TO .3 THICK; IN REEL FORM MAX. Æ440.		148	210
LIDDING MATERIAL : MAX. WIDTH : (HSL COATED HARD ALU / GLASSINE FOIL) 0.02 TO 0.04 THICK; IN REEL FORM MAX. Æ220.		144	206
MAX. PACK SIZE : (1 UP) (2 UP) (3 UP)		110 x 140 110 x 68 110 x 43	110 x 202 110 x 100 110 x 64
MIN. PACK SIZE :		25 x 45 (1 UP)	25 x 45 (1 UP)
MAX. FORMING DEPTH:		10 (EXTENDABLE TO 20)	10 (EXTENDABLE TO 20)
MAX. WEB SPEED :		5 METERS / MIN.	5 METERS / MIN.
MAX. OUTPUT* : PACKS / MIN :		150 (1 UP) 250 (2 UP)	250 (2 UP) 350 (3 UP)
MAX. STROKES / MIN :		150	150
COMPRESSED AIR PRESSURE (BAR)		6	6
AIR CONSUMPTION (LIT / MIN)		200	350
ELECTRICAL POWER CONNECTION DETAILS :		440 V, 3PH, AC, +N, +EARTH (OTHER VOLTAGE ON REQU.)	440 V, 3PH, AC, +N, +EARTH (OTHER VOLTAGE ON REQU.)
POWER CONSUMPTION : PEAK : AVERAGE :		6 Kw 3 Kw	7.5 Kw 5 Kw
CHILLED WATER REQUIREMENT : (18° TO 20° C) AT 3 BAR PRESSURE		120 LIT / HR.	120 LIT / HR.
NET WEIGHT Kg.		1,200	1,700
GROSS WEIGHT Kg.		1,600	2,400
CASE DIMENSIONS :		2400 x 1270 x 1930 (H)	3430 x 1400 x 1930 (H)

ALL DIMENSIONS ARE IN MM.

*Output depends on pack size, pack configuration, product size & shape, product characteristics etc.