Product Details

Hot sale german technical high quality cement tube mill with CE

Product Description

1.cement tube mill :

This type cement tube mill is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability,the output size can reach 2500mesh (5um).

2. Advantages of cement tube mill:

1)High Efficiency of cement tube mill

Under the same finished final size and the same motor power, the capacity of micro powder grinding mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

2) Long lifecycle of spare parts of cement tube mill

The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.

3) High safety and reliability of cement tube mill

As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

4) High fineness, flexible adjustment, cement tube mill

The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.

5) Environment-friendly of cement tube mill

The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.

3.Working principle of cement tube mill :

1)Raw material which has been crushed to the size specified is elevated into a hopper from which the stuff is loaded. And then through the vibrating feeder ,the materials will transferred evenly and continuously into the cement tube mill for powder-processing. After this,the ground stuff is carried by the air from the blower into the classifer for regrinding.The set's airflow system is closely sealed up and circulated under the condition of negative and positive pressure.

2) The cement tube mill is driven by rotation of the central axle through decelerator ,with the up end of the axle connecting to a quincunx-rack upon which the grinding equipment is fixed. The whole set equipment turns together with the axle along the grinding ring while the rollers rotate driven by the fractional force .A set of shovel are installed at the lower end of the quincunx-rack.While turning together with the rollers ,the shovels shed the stuff onto the gap between the rollers and the ring ,and that's where the stuff layer forms .The rotating rollers ,while turning together with the ring ,grind the stuff layer into powder.

3) The turning speed of the impeller can be adjusted to the requirement of the fineness of powder products .

4) cement tube mill plays an important role in ensuring the function of the grinder . As the high-speed revolving air current mixed with ground stuff is flown into the cyclone-collector ,the ground stuff is separated from the air-current

4.Application of cement tube mill:

SCM Series cement tube mill is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

5.Technical Parameters of cement tube mill :

Name & Model		SCM8021	SCM9024	SCM10036	SCM12544
Ring roll number (pcs)		21	24	36	44
Working diameter (mm)		Φ800	Φ900	Φ1000	Φ1300
Grinding rill and roller path number (pcs)		1X3	2x4	1x4	2x4
Revolving Speed (rmin)		230-240	200-220	180-200	135-155
Max feed size (mm)		≤10	≤20	≤20	≤20
Final size (mesh)		325-2500	325-2500	325-2500	325-2500
Output (kgh)		400-4500	600-5500	400-7500	1200-12000
contour dimension (mm)		13000x3000x5800	14700x4800x8600	18000x4600x8600	14000x9000x10250
Whole machine capacity (kw)		144-165	185-204	263-290	380-430
Main motor	Model	YB2-250M-4	YB2-280M-8	YB2-315L1-6	YB2-315L2-6
	Power (kw)	55	45x2	110	160
	Rotate speed (rmin)	1440	980	990	990
Analytical engine (FM motor)	Model	Y180M-4	Y180L-4	Y100L1-4	YB2-225S-4
	Power (kw)	18.5	22	30	37
	Rotate speed (rmin)	1440	1440	1440	1440
Blower motor	Model	Y225M-2	Y250M-2	Y280M-2	YB2-250M-2
	Power (kw)	45	55	75	55x2
	Rotate speed (rmin)	2940	2940	2940	2940
Elevator	Bucket model	TH-200	TH-200	TH-300	TH-300
	Motor model	Y100L-4	YB2-100L2-4	YB2-112M-4	YB2-112M-4
	Motor power (kw)	3	3	4	4
	Rotate speed (rmin)	1440	1440	1440	1440
Hammer Crusher	Hammer Crusher model	PC300x400	PC400x600	PC400x600	PC600x800
	Motor model	YB2-160M-4	YB2-180M-4	YB2-180M-4	YB2-280S-6
	Power (kw)	11	18.5	18.5	45
	Rotate speed (rmin)	1440	1440	1440	990
Magnetic vibrating feeder	Model	GZ1F	GZ1F
Magnetic vibrating feeder	Power (kw)	0.06	0.06
Electrical machine	Model			LS159x1050	LS159x2000
Electrical machine	Power (kw)			2.2	3
Discharge valve	Discharge valve model	ZJD-200	ZJD-200	ZJD-200	ZJD-250
	Motor model	YB2-80M2-4	YB2-80M2-4	YB2-80M2-4	YB2-90S-4
	Power (kw)	0.75x2	0.75x2	0.75x3	1.1
	Rotate speed (rmin)	1440	1440	1440	1440
Pulse dust collectors	Model	DMC120-II model	DMC144-II model	DMC184-II model	DMC160-II model*2
Air compressor	Air compressor Model	KSH100D-7.5KW	KSH240D-15KW	KSH240D-15KW	KSH240D-15KWx2/td>
	Motor model	YB2-132M-4	YB2-160L-4	YB2-160L-4	YB2-160L-4
	Power (kw)	7.5	15	15	15
	Rotate speed (rmin)	1440	1440	1440	1440

SCM PULVERIZING LINE

SCM8021 PULVERIZING LINE

Customer profile

Certain micropowder Co.,Ltd Zhejiang

Mr. Sun, general manager of the company, is engaged in micropowder industry for more than 10 years, with finished product fed to more than 160 manufactures.

It purchases SCM8021 superfine micropowder grinder from our company

Production Line Condition

Site: Zhejiang

Daily running: 11 hours

Feedstock: calcite, limestone, particle size 200-400mm, particle size into grinder<25mm

Finished product: 600 screen mesh-1250 screen mesh micropowder, finished product used in paint, coating, plastic additive, ect

Configuration: SCM8021 superfine micropowder grinder complete equipmeny

Main Specifications

Model	Max.feed size(mm)	Size of Finished Product(mesh)	capacity(kg/h)
SCM8021	10	325-2500	400-5500

Customer’s comment

Shibang’s superfine micro powder grinder not only can attain our strict requipments on product quality of screen mesh and fineness very well, but also is relatively low in dissipation of energy. What is the most relieved is Shibang’s after-service, which is very timely and highly efficient. Furthermore, technician would ask use status of equipment over the telephone or personally come here for return visit.

---Mr. Sun, general manager of this company

Packaging & Shipping

Ways of Packing:
1.Sand blasting, coat with high quality paint;
2.Product wrap by PP-Bubble
3.Load container, Spear Parts in wooden case.

Transportation:
1. By sea Freight;
2. MSK/MSC/APL/EMC/WANHAI/KLINE
3. We will remind you before boat arrival

Exhibition Site

Shanghai Shibang Machinery Co., Ltd participate in various exhibitions frequently.

Such as Bauma China,China Import and Export Fair , Asia-pacific's International Mining Exhibition, Bauma Africa, CONEXPO Latin America , etc.