Carbon Dioxide extinguishers are filled with non-flammable carbon dioxide gas under extreme

pressure. You can recognizea CO2 extinguisher by its hard horn and lack of pressure gauge

CO2 cylinders are red and range in size from 4.5 lbs to 100 lbs or larger. In the larger sizes, the hard

horn will be located on theend of a long, flexible hose.

CO2s are designed for Class B and C (flammable liquid and electrical) fires only. 

How to use:

1. Pull the Pin at the top of the extinguisher. The pin releases a locking mechanism and will allow you to discharge the extinguisher.

2. Aim at the base of the fire, not the flames. This is important - in order to put out the fire, you must extinguish the fuel.

3. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is seleased, the discharge will stop. 

4. Sweep from side to side. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish.

5. Be sure to have read the instructions on your fire extinguisher.

FAQ:

1. Do you can supply the samples?

we can supply the samples by free if the qtys is not more,

but the clients should pay for the express fees.

2.Do you have the MOQ?

Because we have many types and sizes of goods, the detailed

Minimum qtys really are very difficult to confirm, but the total

amout should be not less than USD3000.00

3. Can you add some logo on the products?

Yes, we can. but we usually have the qtys requirements.

4. Are you able to design or explore a new products for us?

yes, we are able to, only the clients can supply the drawings

or samples.

Finally,welcome to purchase for Howdy Fire Equipments.We're sure any of your inquiry will get our prompt reply!