CAN and Serial Communication instruments from Curtis display vehicle data and fault information. These gauges connect directly to Curtis controllers and I/O modules, easily, seamlessly and conveniently. 

The Curtis enGage® III is a three function, microprocessor based instrument that can be factory or user defined to monitor various functions, including fuel, temperature, pressure, voltage, battery state of charge and maintenance/status.
2 versions:

12VDC, no buttons, no backlighting; 

12-48VDC, with buttons, with backlighting

enGage® III

Curtis Model enGage® III is ideal for use in Industrial and commercial vehicles, including: material handling, outdoor power and construction equipment, engine driven stationary devices, commercial cleaning equipment, and golf/light-on-road. Ideally suited for monitoring scheduled maintenance, warranty and leasing intervals. 

• Integrated dash design allows monitoring of the vehicle
with a single, compact panel resulting in enhanced vehicle
differentiation and minimized instrumentation expense.
• enGage™ III accepts two sender inputs and displays those
functions either simultaneously (one as a bargraph, one
numeric) or by toggling (either automatically or manually via
the front-panel buttons).
• Multiple functions in one programmable unit:
– Lower overall stocking requirements.
– Reduced installation time and labor.
– Reduced vehicle instrumentation count.
– Ease of ordering.
– Volume pricing/purchasing advantages.
• Field programmable maintenance monitor allows dealers
and/or users to program maintenance intervals for their
specific application.

• Settable hour meter allows replacement of a failed hour meter
without loss of total elapsed time.
• Flexible output modes include flashing LCD segments, LED
warning icons and FET (0.5A) which allow the equipment
designer to define critical parameters and to choose
appropriate notification methods.
• Curtis battery monitoring technology means proven algorithm
protection capabilities which provide reliable state of charge
information.
• Sealed front panel buttons allow easy:
– Setting of maintenance interval.
– Setting of battery monitoring profile.
– Re-setting of maintenance hours.
– Setting of total hour meter.
– Toggling the display between multiple functions.

• Clock function allows vehicle operator easy and safe access
to time of day status.
• Snap-Fit design and integrated connector lowers installation
and production costs and eliminates traditional mounting
hardware kits.(Optional mounting bracket avail.)
• Rated IP65 front and rear (AMP version, when connect- ed)
providing a sealed, rugged instrument.
• EEPROM non-volatile memory retains usage data with out
battery back-up.
• Attractive contemporary look enhances vehicle styling and
maximizes readability.
• Reliable solid state design means no moving parts minimizing
warranty costs.

• Operating voltages
12VDC nominal (9 to 15VDC)
12-48VDC nominal (9 to 60VDC)
• Operating temperature
-40°C to +85 °C
• Storage temperature
-50 °C to +90 °C
• Humidity
95% RH (non-condensing) at +38 °C
• Shock
SAE J 1378 March 83. Amplitude
44-55 g, half sine, 9-13 ms duration
• Vibration
SAE J 1378
Double amplitude of 1.53mm with frequency sweep for
10-80-10 Hz (20 g max) at 1 minute intervals

• Sealing
IP-65 (face), IP-40 (rear Molex), IP-65 (rear AMP with
connector installed)
• Output signal format (Power MOSFET)
N channel MOSFET (switches ground side only)
Programmable; capable of sinking up to 0.5A, maximum
• Adjustable BDI Discharge Profile Range
Full: 1.80 – 2.30 V/cell (Factory set at 2.04 V/cell)
Empty: 1.50 – 2.20 V/cell (Factory set at 1.73 V/cell) 100
mV/cell is minimum differential between full & empty
• BDI Open Circuit Reset Level factory set at 2.09 V/cell
• Maximum Current Ratings*
12VDC Only Models: 155 mA @ 15VDC
12 – 48VDC Models: 140 mA @ 60VDC
* Maximum current draw listed based upon all icons
illuminated.
Each icon draws 15mA.

NOTE: BDI, Maintenance Monitor, Settable Hours and Time of Day functions require programming buttons on front display.
Buttons NOT available on units rated 12VDC only.

Company Name: Suzhou Benign Intelligent Equipment Co., Ltd.

Operational Address: 204A, Bldg. A, Founder Tech Park, No. 188, Suhong East Road, Suzhou, Jiangsu, China (Mainland)

Website:

Website on :http://benign.en.

Contact Mr. Benign Chen

Department: Director/CEO/General Manager

Job Title: General Manager

Telephone: 86-0512-62890289

Mobile Phone: 18020285375

Fax: 86-0512-62890289

Zip: 215000

Warranty:  Two year limited warranty from time of delivery.