Name: Lintratek 3g LCD display mobile signal booster 2100mhz wcdma 3g display repeater
Brand: Lintratek
Availability: InStock

Product Details

Lintratek 3g LCD display mobile signal booster 2100mhz wcdma 3g display repeater

Product Description

Specification:

Model No		KW20L-WCDMA 3g display repeater
Parameter data		Uplink	Downlink
Frequency Range	WCDMA	1920-1980 Mhz	2110-2170 Mhz

Output Power		15±2dBm	20 ±2dBm
Gain		65 ±2 dB	70±2dB
LED Display screen		show signal bars, Gain,power detect, DC power
Bandwidth		Wide Band
Ripple in Band		WCDMA≤5dB
Spurious Emission	9KHz~1GHz	≤ -36 dBm
	1GHz~12.75GHz	≤ -30 dBm
VSWR		≤3
MTBF		>50000 hours
Power Supply		AC:100~240V, 50/ 60Hz;DC:5V 2A
Power Comsumption		< 6W
Impedance		50 ohm
Mechanical Specification
RF Connector		N-Female
Dimensions (DWH )		20011025(mm)
weight		1Kg
Installation Type		Wall Installation
Environment Conditions		IP40
Humidity		< 90%
Operating Temperature		-10℃ ~ 55℃

Outer apearance details:

Display details:

Neutral full kit

Signal Solution

Trade Shows

Logistics

FAQ

After sale service

We have two years quality warranty for all customers,you can return goods to us when you receive defective repeater,but freight charges should be responsible by buyer.

How should you install repeater (very easy and simple):

Step 1: Use your mobile photo to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

step 4: Mount your indoor antenna with signal repeater

step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor ANT (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.