Product Details

Powder material truck is also called bulk cement trucks, made up by special automobile chassis, bulk cement truck tanks, tracheal road system, automatic discharging device and so on. Suitable for fly ash, cement, lime powder, mineral powder and granular base grain diameter is not more than 0.1 mm powder dry bulk transport of materials. Mainly used for cement, cement warehouse and large construction sites, save a lot of packaging materials and loading and unloading work.

1. Optimization of overall structure, high safety and reliability.

2. Tank Body is made from a special production tooling, beautiful appearance.

3. Optimization of tank body structure, large effective volume, fluidized effect is good.

4. Air compressor selection of domestic famous brand, with excellent performance.

5. Discharge quickly, residual rate is low, the operation efficiency is high, big gains.

6. High welding quality in automatic butt welding for high tank pressure strength.

HOWO Powder Material Truck basic configurations and main technical parameters(36M³-45M³,EUROⅡ,extended cab)
Mixer tank effective volume,m³		36
Kerb weight(vehicle/chassis),kg		17130
Gross mass(vehicle/chassis),kg		31000
Rated load,kg		13740
External dimensions(length×weight×height)mm		11990×2500×3880
Tank paramenter	Air compressor	Dunhua Yanbian Liyuanquanyuan 10 cubic air compressor
	Material	The tank and the head's material is Q235A/6mm
wheelbase,mm		1800+4600+1350
Front/rear overhang(vehicle/chassis),mm		1500/2740
Wheel track(front/rear),mm		2022/1830
Approach/departure angle(vehicle/chassis)		16/11
Maximum speed,km/h		90
Typical vehicle model		ZZ1317N4667C1/N1WAS
Cab	Model	HW76
	Type	Extended cab ,single berth,up/down and front/back adjustable steering wheel,VDO instrument and control module,and safety belt with double locking mechanism,exterior sun visor
Engine(optional)	Model	WD615.87 290hp	WD615.69 336hp	WD615.47 371hp
	Rated power,kw/rpm	213/2200	247/2200	273/2200
	Maximum torque,Nm/rpm	1160/1100-1600	1350/1100-1600	1460/1100-1600
	Displacement,L	9.726
	Type	Inline 6 cylinder,2 valves,supercharged intercooling,rear supercharger
Clutch		Φ430Bdiaphragm spring clutch.Hydraulic control air power assisted.Standard 430A type for WD615.49 engine,Standard 430Btype for 615.69 engine,Standard 430C type for WD615.87 engine.
Transmission		SINOTRUK HW series 10 speed transmission,main and auxiliary transmission struct,main transmission with double countershaft,auxiliary transmission with planetary reducer.Standard HW15710 type for WD615.87 engine,standard HW19710 type for WD615.69and WD615.47 engine.
Front axle		HF9 drum-type,rated load of 9T
Drive axle		HC16 double reduction(central reduction+wheel reduction),speed ratio:5.73,4.8
Suspension		Front and rear leaf spring suspension,front suspension with shock absorber and transverse stabilizer,rear suspension is disconnected type with transverse stabilizer
Steering system		ZF8098 steering gear,ZF steering oil pump,system pressure of 18Mpa
Brake system		Service brake:dual-circuit pneumatic brake;parking brake:energy storage spring air cutoff brake;auxiliary brake:engine exhaust brake.Standard engine EVB,and with ABS option automatic slack adjuster
Electrical system		Voltage:24V;generator:2240W;Starter:24V,7.5kw;battery:12V/165AH,2pieces
Tyre		12.00R20;optional 12.00R24/12.00-24
Tank volume,L		300