functions: 3G ICS amplifier

a. AGC(Auto gain control):

with this function can automatic check the input signal and output signal of repeater. If input signal overloading, system will adjust the gain, and auto setting parameter for repeater`s normal output. Ensure equipment will not increase jamming base station, no matter outside`s signal change.

b. Safe Mode:

Equipment will automatic check the input and output signal strength and auto adjust gain during use, when input signal overloading equipment lose control, will open Safe mode, shut off the amplification circuit, then under dormant state, ensure equipments not affect the base station working.

c. Double ALC(auto level control):

The Automatic adjustable range of equipment`s gain dynamic reach 60dB, the ALC of system Dual redundant, Ensure system`s high reliability and high stability.

d. Uplink & Downlink automatic linkage debugging:

after installed and power on, the system will automatic check input power, and control output power`s value, when work out system`s downlink gain, will automatic adjusting system`s uplink gain, to keep system`s amplification balance, come true the equipment`s Uplink & Downlink automatic linkage debugging.

Specification Details

install repeater (very easy and simple):

a.  Equipment as usual put on the windowsill or table closer to window, with light side is Front, face to indoor, which need signal        cover area; the other side face to outdoor, which direct to base station, to receive signal.

b.  In order to ensure the use effect of the equipment, in front of equipment which distance 1meter range should not have shelter,        and back of equipment 2meters range should not have shelter(or the glass pasted with metal film), 1meter radius range should      not always have peoples move.

c.   After power on, you should leave equipment distance over 1meter then watch the lights situation, if 4 lights all green then              means receiving signal is very good; 3 lights green means receiving signal is good; 2 lights green means receiving signal              normal; only 1 light green means receiving signal is bad, should adjust equipment`s drop location.

d.   Standing in the flank of equipment and fine turning the equipment`s face direction(always keep in front of equipment without          shelter), until all the lights be green and face to bad signal area, then finished installation.

e.   If the window have no place to put equipment, you can pasting on the glass with equipment`s self MAGIC TAPE, which right        paste location should use cell phone to test where can receiving strongest signal before pasting.

 A regular ICS repeater consists of: (full kit)

• 1 -ICS repeater device
• 2 - Power adapter  
• 3 - User manual  
• 4 - blank package box