1.The machine employs an imported laser diode array, use a light emitting diode pump medium Nd:YAG with wavelength 808nm to form a laser output with wavelength 1064nm.
2.The machine takes small area, only one-forth the size of traditional lamp-pumped marking machines.
3.High electro-optical switching efficiency, good light beam modes, maintainence free,used for engraving in metals and a variety of non-metallic materials,especially suitable for on-line marking at various kinds of production line.
4.Computer control, easy operation, small area, low power consumption, high efficiency, long service life, maintainence free, high marking precision, etc....
Technical parameters:
Laser working medium:Nd:YAG | X,Y working stroke: 85×85mm |
|
|
Laser Wavelength:1.064μm | Power source: AC220V±10%,50Hz |
| |
Laser power:50w | Input power:≤1KW |
| |
Modulation frequency:500HZ-50KHz | Cooling system: refrigerating unit |
| |
Scanning speed: 7000mm/s | Safety: Overcurrent, overtemperature, overvoltage protection | ||
Bright dipping way: Continuous laser resist or trimming Q | Internal recycle medium: deionized water, distilled water or purified water | ||
Marking repeatability precistion:0.001mm | Machine continuous working time: 24h |
| |
Marking range:65X65mm (optional:110X110mm) | Marking depth:0.01-0.2mm (Depends on material of workpiece) | ||
Marking line width:0.01-0.2mm (Depends on material of workpiece) | Minimum character:0.3mm |
| |
Overall size:900×1300×1400mm | Weight:180Kg |
| |
