led production line

led production line 8 zones reflow soldering machine:

8 independent heating area plus 2 cooling area, transducer control

Windows7 operation system

Computer control +PLC control

Guide rail with width adjustable power-driven

Chain adjusted with transducer +imported motor

Upper cover open power-driven

Solder paste without lead

Overheat/lower heat alarm (sound and light)

Temperature controlled PID+SSR

UPS backup power, don't worry power failure

Barretter 1.5mm galvanized iron sheet

Temperature curve test wire 4 pcs

PCB Temp. deviation: ±2°C(250X200mm pcb,7
passageway KE test)

Temp. precision: ±1°C

PCB width: 50~400 mm

Rail to the ground: 900±20 mm

Warming up time: about 25±5 min

Transfer rate: 300~2000 mm/min

Power source:5 wires 3 phases  380V

Power: Start 32KW   Work 11KW

Weight: 2095 kg

Dimension: 5310x1353x1490(mm)

led production line wave soldering machine:elding machine circuit board/inverter welding

led production line PCB Loader & PCB  unloader:

Dimension: L1350×W710×H1200mm(loader)  L1980×W710×H1200mm(unloader)

Conveyor Height: 900mm±20mm(adjustable)

Net weight: 140kg

Air consumption: 100L/h

Air pressure: 4-6bar

Power source: AC220V, 50/60Hz

Power: 150W

Workbin change over time: 45 seconds

Lifting step: 10mm,20mm, 30mm, 40mm, 50mm (Optional)

Push rod dimension: 20mm

Control: Mitsubishi PLC

PCB positioning: AC braking motor+photoelectric sensor

Loading rack dimension: L355×W320×H565mm

PCB dimension: (50-250)*(80-330)mm

Edge of fixing: Front edge

Conveying direction: L-R / R-L (Optional)

led production line Semiautomatic solder paste printing machine  

led production line Pick and Place Machine

1) The platform transmission uses the imported linear guide rail and lead screw in combination with the Japan original Panasonic servo drive ensuring the high-speed stationarity and control precision of the platform.

2) The transmission of the X and Y shafts uses the imported high-precision ground lead screws and linear guide rails in combination with the Japan Panasonic servo drive ensuring the high precision and high speed of mounting.

3) 4 sets of high-speed mounting heads work simultaneously. The sucking heads use high-precision durable spline shafts.

 4)Easy operational program, much more convenient, automatic vision makes position fixing more accurate and convenient.

5) Multi Feeder optional, can meet different kinds of LED mounting.

6) Powerful software adopts numbers and images to display the program coordinate, easy and more convenient.

7) Software adopts data system, and store different types of PCB for convenient adjustment, just need to programming one time for new products to use forever.

8)Platform: Y axis, X axis can be moved manually, speed adjustable, can achieve arbitrary point manual arrived, convenient programming.

9) LED Pick & Place Machine use imported vacuum detection system, it can check the suction accurately to prevent material leakage and throwing effectively.

10) Internal negative pressure system: low noise, long service life and vacuum pressure constant.

11) Standard setting:1 PC,4 mounting heads,12 nozzles.

12)Optinal :8mm,12mm,16mm 24mm automatic feeder, different nozzles, industrial pump, air compressor .

OUR PARTNERS:welding machine circuit board/inverter welding machine circuit board