Name: High quality 24 hours floating time floating fish feed extruder for aquaculture
Brand: Allance
Availability: InStock

Product Details

High quality 24 hours floating time floating fish feed extruder for aquaculture

I. Introduction for Floating Fish Feed Pellet Extruder

It is widely used for producing maize flour, soybean flour or compound powder, wheat bran into high grade aquatic feed pellets for fish, catfish, shrimps, dog,.cat etc. The puffing fish feed pellets can float on the water surface for over12 hours without water polution. According to your requirement and production scale, floating fish feed machine can be classified into dry type machine and wet type machine.

II. Working principle for Floating Fish Feed Pellet Extruder

After the material is sent into feeding device, they will be extruded and expanded by the screw shaft with high pressure and temperature which makes the raw material fully cooked and sterilized. Then the expanded material will be formed into pellets by shaping mould. You can change different moulds to make pellets with different diameters. After that a cutting device will cut the formed pellets into different length as required.

III.Features for Floating Fish Feed Pellet Extruder

1.According to different requirements, variety shapes of high-grade feed pellets for fish, shrimps .etc

2.The finished pellets can keep floating for 12 hours without pollution to water.
3.The floating time can be controlled by the puffing degree adjustment
4.Floating fish feed machine can make pellet from diameter 1mm-12mm just by changing the mould.
5.Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
6.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and
also makes the pellets easily to digest.
7.The cutting device can be adjusted to make pellets of different length.
8.The wet type machine needs a boiler to make steam which can conduct steam to the conditioner and ripen the raw material in advance.

IV.Technical datas for Floating Fish Feed Pellet Extruder

Dry Type Floating Fish Feed Pellet Extruder

Model	Capacity (t/h)	Main Motor Power(kw)	Screw Feeder Power(kw)	Screw Diameter(mm)	Cutter Power(kw)
DGP50	0.06-0.08	11	0.4	φ50	0.4
DGP60	0.12-0.15	15	0.4	φ60	0.4
DGP70	0.18-0.25	18.5	0.4	φ70	0.4
DGP80	0.3-0.35	22	0.4	φ80	0.6
DGP90	0.4-0.45	37	0.4	φ90	1.5
DGP120	0.5-0.7	55	0.4	φ120	2.2
DGP135	0.8-1.0	75	0.4	φ133	2.2
DGP160	1.2-1.5	90	0.75-1.1	φ155	3.0
DGP200	1.8-2.0	132	1.5	φ195	3.0-4.0

Wet Type Floating Fish Feed Pellet Extruder

Model	Capacity(t/h)	Main Power(kw)	Feeding Power(kw)	Screw Diameter(mm)	Cutter Power(kw)	ConditionerPower(kw)
DSP60	0.18-0.20	15	0.4	60	0.4	0.37
DSP70	0.30-0.35	18.5	0.75	70	0.4	1.1-1.5
DSP80	0.40-0.45	22	0.75	80	1.5	1.5-2.2
DSP90	0.50-0.55	37	1.1	90	2.2	2.2-3.0
DSP120	0.7-0.8	55	1.1	120	2.2	2.2-3.0
DSP135	1.0-1.2	75	1.5	135	3.0	3.0-4.0
DSP160	1.8-2.0	90	2.2	155	3.0	4.0
DSP200	3.0-5.0	132	2.2	195	4.0	5.5