Specifications

Auto-Dial Alarm
1.Anti-interfere
2.anti-decode with remote contro
3.32 wireless and 7 wired
4.LED Defense zone display

newest OEM/ODM photoelectric beam detector motion sensor panel home security alarm system YL--007K3  

Model Number:YL-007K3

32 defense zone house/commercial intruder alarm system with:

1. Anti-interfere function. When someone interferes it with same frequency, the control unit will activate siren to alarm.

2. Support anti-decode with remote control

3. Digital LED Defense zone display. Users can know which defense zone is triggered

4. 32 wireless defense zone display (1 to 32) and 7 wired defense zone display (91-97).

5. Every defense zone can set independently arm, disarm, delay alarm and so on .

6. Have the function of “one-key arm”. User can start  “Home arm” or “Out arm” freely by keeping pressing one key on remote control

7. Can set the reminder sound of defense zones. Will remind users of remembering arm the alarm system when going out.

8. Can work with other products of our company. Such as wireless big outdoor siren and mini siren and YL-007AS.

9. It stores 3 groups of monitoring center and 6 groups of user phone numbers to dial out and play the recorded message if there is an alarm.

10. Can arm/disarm with remote control or keypad on the control panel .

11. Can arm/disarm/listen-in by calling the host phone number (The phone numbers of control panel).

12. Have the function of reminder for circuitry failure. For example, if telephone line is cut or short, the control panel will alarm.

13. Have the superior of connection.

14. Have in-built backup battery and can continue to work and last for 24 hours when electricity is cut or in failure.

 

 

Kits:

main panel 1pc 

wireless PIR detector, 1 pc

wireless door sensor,  1pc

siren,  1pc

remote controllers,  2pcs

power supply, 1pc

manual 1pc

 

 

Technical specifications:

Input Voltage:	DC12V/1A
Standby Current:	<55mA
Alarming Current:	<450mA
Wireless Frequency	315MHz, 2262/4.7MΩ
GSM Frequency	900/ 1800/ 1900MHz
Back-up Battery	NI-HI AAA*6  DC7.2V
Siren Volume	110dB

 

 

 

For occasions:

 

house,   convenience store,    car,     hospital    school,   library,   bank,   financial office,  office, let, community,  factory floor,  storehouse of factory,  parking lot

 

 

 

Installation of Main panel

 Power the system on and switch it to “ON”, the power status will be blinking and sound “beep” which shows the main panel works normally. It will sound three “beep beep beep” every 30 seconds, which helps users remind of setting alarm phone numbers. The sound “beep” will disappear when you finish the alarm phone number setting.