LCD Sensor Warning CO Carbon Monoxide Poisoning smoke Gas Alarm Detector Tester
Sensitivity/Alarm Time:
- Loud 85 decible alarm
- Permanent carbon mnoxide sensor
- Power by 3AA size batteries
- The alarm sound pattern is foru short alarm beeps . Then red LED will flash while in alarm mode .
- One 'chirp'very 30 second s is an indication that the battery is low ( need replacement )( green Led still flashes once every 30 seconds)
- Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit during co alarm
- Alarm memory feature : If the unit ever alarms and during the period the button is not pressed , pressing the button, green LED will flashes once every second for one minutes and the peak alarm level will be indicated on the LCD
- Green LED : The green LED flashes every 30 seconds to indicate the unit is operating properly
- Red LED : When a dangerour level of carbon monoxide is detected the red LED will flashes and the alrm pattern will sound .
CAUTION: This alarm will only indicate the presence of monoxide at the sensor. Carbon monoxide gas may present at other area.
Specification:
- Power Supply: 3pcs AA batteries.
- Sensitivity & Time: 300ppm,alarm with 3 minutes
- Standby Current: <80uA;
- Alarm Current: <80mA
- Operation Ambient Condition: 5~40degree, 20~90%R.H.
- Display tolerance :+/- 100PPM (0-200PPM):+/-50%( more than 200 PPM)
Package Content:
1 x Carbon Monoxide Alarm(not included battery)
2 x Screws
Picture Show
Any question . welcome to contact us !