Abrasion and impact resistant food safe white UHMW-PE cutting board
USD $4 - $5 /Ton
Min.Order:1 Ton
Ningjin Jutai Chemical & Plastic Co., Ltd.
Abrasion and impact resistant food safe white UHMW-PE cutting board
Ultra-high molecular weight polyethylene(UHMW-PE)performance index
Physical performance | Standard | Unit | UHMWPE-M4 |
Physical performance | - | - | - |
Density | GB1033-86 | g/cm3 | 0.98 |
Water absorption | GB1034-86 | % | < 0.01 |
Maximum allowable working temperature(not subjsected to high sress) | - | - | - |
Max temperature | - | °C | 90 |
Minimum temperature | - | °C | -269 |
Mechanical properties | - | - | - |
Tensile yield strength | GB1040-79 | MPa | 21 |
Ultimate tensile strength | GB1040-79 | MPa | 38 |
Tensile yield elongation | GB1040-79 | % | 12 |
Tensile elongation at rupture rate | GB1040-79 | % | 340 |
Modulus of elasticity for tension | GB1040-79 | MPa | 820 |
Cantilever beam impact strength(gap) | GB1843-80 | KJ/m2 | Not broken |
Flexural strength | GB9341-88 | MPa | 26 |
Modulus of elasticity in static bending | GB9341--88 | MPa | 760 |
Compressive strength(deformation 10%) | GB1041-79 | MPa | 27 |
Modulus of elasticity in compression | GB1041-79 | MPa | 550 |
Shear strength | GB1041-79 | MPa | 33 |
Hardness | GB2411-80 | Shore D | 65 |
Static friction coefficient | GB10006-88 | - | 0.07-0.15 |
Coefficient of kinetic friction | GB10006-88 | - | 0.07-0.11 |
Thermal property | GB1036-89 | °C-1 | 1.5×10-4 |
Coefficient of thermal conductivity( 23 °C) | GB3399-82 | Cal/cm sec °C | 8.5×10-4 |
Specific heat( 23 °C) | GB3399-82 | Cal/g°C | 0.44 |
Volume sesistivity | GB1410-78 | Ohm cm | >1015 |
Surface sesistivity | GB1410-78 | Ohm | >1015 |
Dielectric constant( 1MHZ ) | GB1409-78 | - | 3 |
Dielectric strength | GB1408-78 | Kv/mm | 70 |
ISO9001 Quality Certificate
Products range
Different high quality anti-static self-lubricating UHMW-PE parts ,UHMWPE Sheet,UHMWPE Board,UHMW-PE Guide rail,UHMW-PE Strips,UHMW-PE Bar ,UHMWPE Panel,UHMWPE Plate,UHMW-PE Pad ,UHMWPE Filter Plate,UHMWPE Fender Pad,HDPE Pad,HDPE Plate,HDPE Panel
Main characteristics are as follows:
1. UHMW exhibits virtually no water absorption
2, Non-Toxic
3. Low coefficient of friction
4. Corrosion resistant
5. Abrasion and impact resistant
6. Wear Resistant
7. Great liner material for industrial material handling applications
8. no noxious,food safe
Jutai Chemica&Plastic Co.,Ltd,Ningjin County,Shandong Province