Butyl Waterproof Sealing Tape:

Product Description:

The butyl waterproof sealing tape, which is made from butyl rubber, polyisobutene and other materials, is an environmental solvent-free and self-adhesive sealing material that is produced on the basis of a special formula, new compounding vulcanization technology and high polymer material and by means of special technological process.

specifications:

non-woven fabrics, PE FILM, ect. and double-face one (with no base material, and with gridding cloth).

Thickness:   0.5mm-3mm ,     Maximum width: 1m

It can also be produced according to the customer's requirements.

product features:

1) Excellent mechanical properties: high bonding strength and tensile strength, good elasticity and extension performance, strong adaptability to the shape change and crack of the interface, and good ability to trace the shape change of the substance.

2) Stable chemical properties: It is equipped with excellent chemical resistance, weather fastness and corrosion resistance.

3) Reliable application performance: excellent binding property, water resistance, leak tightness and low temperature resistance, and high stability in size.

4) Easy operation technology.

Main uses:

1)For the waterproofing of the roofing, underground and structural construction joint of new projects, as well as the lap joint and sealing of high polymer waterproof roll.

2)For the sealing and waterproofing work of the structural construction joint of subway tunnels in municipal engineering.

3) For the gas tightness, water tightness and shock absorption of the joint of colorful contour plate, as well as the gas tightness, water tightness and shock absorption of the joint of the polycarbonate sheet engineering.

4) For the bonding and sealing work for the assembly and installation of vehicles

5) For the waterproofing and sealing work for the joint of the steel structure construction.

6) The butyl rubber tape that covers the aluminum foil is fit for the waterproofing and sealing for various of roofing engineering color steel. steel structure, waterproof roll and PC sheet which are exposed to the sunshine.

Notes:

(1)   The product shall be operated within -15℃-45℃(when the temperature exceeds the specified scope, relevant measures shall be taken)

(2)   The surface of the base layer must be cleaned and keep dry, with no capping mass or greasy dirt.

(3)   The bonded place cannot be torn or de-bonded with in 24 hours after construction.

(4)   Select the different types and specifications of butyl sealing tape according to the requirement of the actual engineering.

(5)   The surface of the bonded base material shall has no greasy dirt, dust or moisture.

(6)   In order to ensure that the temperature of the bonding strength surface is above 5℃, special production can be conducted under specific low temperature environment.

(7)   It can be used after a circle of adhesive tape is uncovered.

(8)   It cannot be used a long with the waterproof material that contains benzene, toluene, methanol, ethylene, silica gel and other organic substances.

Technological characteristics:

(1)    Convenient and efficient construction: to use the butyl sealing tape, it shall be bonded once and for all, and the surface of the base layer shall be clean.

(2)    Broad requirement on construction environment: it can be operated normally under -15℃-45℃ of environment temperature and below 80% of humidity, and it has strong environmental suitability.

(3)    Simple and reliable repair technology: for the large leakage part, only the single-face tape needs to be used.

Construction tools:

Cleaning tools, scissors, roller, wallpaper knife, etc

Stipulations of construction:

(1)   The stipulations apply to the sealing and waterproofing work of the roofing and metal plate of civil engineering structure that uses the rubber tape for bonding the waterproof roll, metal contour plate, PC plate and other supporting materials.

(2)   To design and use the rubber tape, the relevant regulations and the enterprise standard of the company shall be followed.

Construction method:

1. Construction method of the new engineering of steel structure roofing

(1)   Select the proper specification according to the shape of the metal plate or the gap and joint width of the bonded part and in line with the requirements of the engineering design.

(2)   Clean the bonded part of the metal plate.

(3)   Uncover the double-face rubber tape slowly from one end of the metal plate, and stick the sealing tape to the lap joint of the lower layer of metal plate along the straight line of the joint. Then press the tape gently with your hand, so as to make it stick fast to the metal plate.

(4)   Tear the release paper on the butyl sealing tape, and press the metal plate on the upper layer of the interface into the bonded place. After bonding, squeeze the joint in sequence, so as to ensure that the joint is bonded and sealed tightly.

(5)   Fix and tight the screw, and make the upper and lower bonding surfaces of the tape bonded tightly.

Using the method, shown in pictures:

2. Construction method of eaves gutter of metal plate roofing

(1)   After the eaves gutter is installed, clean the cement surface of the parapet wall above the eaves gutter, and paint the primer.

(2)   After the primer is stable, install the flashing, so as to ensure that it has been installed securely and is bonded tightly with the wall.

(3)   Clean the flashing, and bond the butyl sealing tape with a single face of aluminum foil at the joint of the flashing and the cement wall. Squeeze it in sequence, so as to ensure tat the joint is bonded tightly; if the 80mm wide single face aluminum foil is applied into use, the flashing may not be used for the butyl sealing tape.

3.Construction method of leakage repair work of steel structure roofing

a. Repair method of leakage for the lap joint of metal plate

(1)   Clean the original sealant at the lap joint of the metal plate

(2)   Clean the metal plate at the part to be repaired

(3)   Select different specifications of butyl sealing tape with a single face of aluminum foil according to the joint condition for the leaking part.

(4)   Cover the joint directly with the butyl sealing tape with a single face of aluminum foil.

(5)   After bonding, roll the repaired part in sequence, and make sure that the joint of the butyl sealing tape with a single face is bonded tightly.

b. Repair method of leakage for the joint of profiled steel sheet and cement wall

(1)   Clean the original silicone adhesive at the joint of profiled steel sheet and cement wall

(2)   Clean the joint of profiled steel sheet and cement wall again. There shall be no sugaring on the cement wall. When necessary, the primer shall be painted.

(3)   Stick the butyl sealing tape with a single face of aluminum foil to the joint of the metal plate and cement wall. After bonding, roll the repaired part in sequence, and make sure that the joint of the butyl sealing tape with a single face is bonded tightly.

4. Construction method of day-lighting panel roofing

Application method of double-face tape:

(1)   After the day-lighting panel is installed on the framework, clean the part on the aluminum alloy pressing plate to be bonded with the tape.

(2)   Uncover the tape, and stick it to the grooves on both sides of the aluminum ally pressing plate. After installation, press the tape, and tear the release paper. Then install the aluminum alloy pressing plate on the day-lighting panel, and fix it with waterproof screw.

(3)   Cover and seal the joint of day-lighting panel and wall directly with the butyl sealing tape with a single face.