Product Details

Steel Flat files

Product Description

1.Name:Steel files(flat)(Cut:Becond,Second,Smooth) 4" 6" 8" 10" 12" 14"

Artice No.	Length	Cut No.	Pwe Case(pcs)	Dimensions(cm)	GW/NW(kg)
AN-104	4”	1-3	600	341714	19/18
AN-106	6”	1-3	400	412212	31/30
AN-108	8”	1-3	200	292612	29/28
AN-110	10”	1-3	120	341814	32/31
AN-112	12”	1-3	80	411815	36/35
AN-114	14”	1-3	60	462012	42/41

2.Name:Steel files(flat-pointed)(Cut:Becond,Second,Smooth) 4" 6" 8" 10" 12" 14" 16" 18"

Artice No.	Length	Cut No.	Pwe Case(pcs)	Dimensions(cm)	GW/NW(kg)
AN-204	4”	1-3	600	341714	18/17
AN-206	6”	1-3	400	412212	30/29
AN-208	8”	1-3	200	292612	26/25
AN-210	10”	1-3	120	341814	30/29
AN-212	12”	1-3	80	411815	35/34
AN-214	14”	1-3	60	462012	37/36
AN-216	16”	1-3	40	52229	35/34
AN-218	18”	1-3	30	57199	34/33

Packaging & Shipping

Single Packade or Files Set or packed in cartons

Handles

Label and logo(we can do it as you need)

Functions

1.The anti rust oil on the file shall be removed before filing,or the filing powder will stick to the space

between teeth thus the filling ability is decreased.

2.The filing shall be steady and the speed shall not be too fast,relative stability shall be kept between file and machining surface,and then ideal effect will be achieved.When filing,middle convexity will occur on machining surface because of the up and down movement of the file.

3.As for quenching work-pieces with high hardness surface,it is considered first than the work-piece is grinded,or after surface layer is grinded and then second cut file/smooth cut file is used,diamond file is adopted when necessary.

4.The teeth of new file are much sharp,so you can use the new file to machine soft matal first and to machine hard metal later,as a result,the service life to file will be prolonged.

5.The file is brittle and hard because it is mde of high carbon steel,thus it can not be used for striking something else and the scraps in file shall not be removed by striking,or else the file may be broken and danger may be happened.The scraps can only be removed along the file cut direction by steel wire brush and can not be blown off with your mouth.

6.Prevent the file falling from workbench which may hurt your foot or damage something else.

Company Show

Certification