Size

GTHR8300

capacity

10K-40KVA

AC input

voltage

Three phase input 380VAC±20%

Frequency

50(60) Hz ±5%

Maximum current

56A

AC output

voltage

Single phase  220VAC

Frequency

50(60) Hz

Voltage stability

±1%

Frequency Stability

±0.5% (Mains power failure)

Waveform

SPWM Sine wave

Power factor

0.8(Hysteresis)

Distortion

<3%(Linear load)

Transient response

Voltage variation ≤ 4% (100% load into or cut out)

Output current crest factor

3:1 (Max.)

Battery

Voltage

192VDC

Type

Maintenance-free lead-acid batteries

Charging time

Completed 90% capacity within 8-10 hours

Warning devices

Mains power

The buzzer beeps once every 4 seconds

Mains abnormal

The buzzer beeps once every four seconds, mains mode indicator flashes

The battery will run out

The buzzer beeps once every second, the battery mode indicator flashes, battery low voltage lights

Overload

Overload indicator light, buzzer sounding

UPS Abnormal

Malfunction indicator light, buzzer sounding

Internal protection

Battery

Low battery automatic shutdown, automatic restart utility power is restored, miniature circuit breaker protection

Overload

Go to bypass automatic overload (120-150%) after 60 seconds, after the resumption of normal load

Over Temperature

UPS internal temperature> 85 °C automatically go to bypass

Output short circuit

Limiting, automatic shutdown, mini circuit breaker protection

UPS Abnormal

Automatically go to bypass the mains load

Clutter filter

10~100KHz at 40dB; 100KHz~100MHz at 70dB

Control Panel

LCD Display

UPS operating status display, input, output voltage; input and output frequency; battery voltage; Output Power (%); inverter temperature

Low battery indicator

When the battery voltage is low light

Overload indicator

Overload light

Fault indicator

Failure light

UPSStatus Indicator

AC mode; battery mode; inverter power supply; bypass supply; UPS abnormal

Safety standand

Safety

GB4943

EMI

IEC62040-2,GB7260.2

EMS

IEC61000-4-2~5,GB/T 17626.2~5

Environment

Temperature

0~40°C

Humidity

20~90% Non-condensing

Elevation

Less than 1000m (above sea level for each additional 500m, UPS output derating 5%)

Noise

<58dB (at 1 m from the box)

Appearance

Input and output wiring

Terminal Blocks

Weight (without battery)Kg

350

Size  W×D×H (mm)

725×430×1180

Others

conversion time

>87%

Mains power conversion time

0ms

Inverter / bypass transfer time

≤1ms

Communication Interface

       S232 interface for direct external SNMP card; RS485, DB9 dry Node Optional