Tracking of Tube Hot Metal Detection Device

General Description

The MSE-FMD95 fully digital “All-in-One” Hot Metal Detector incorporates a bar display showing the IR input signal relative to the pre-set trip level as well as selected programmable thresholds and response times via simple external programming switch action. Operates via highly sensitive and stable InGaAs Photodiode, detection is assured even in the presence of high concentrations of water and steam.

The remote lenses impervious to water & steam are built to withstand the harshest of environments. Used in conjunction with flexible armored optic leads, these lenses provide a high level of optical accuracy by allowing the selection of the ideal lens arrangement for the installation. Robust lenses with temperature ratings of 180°C, 600°C and 1000°C can be mounted close to the hot product. Various robust lens mounts are available including air purge. 

General Information

Remote Electronic Controller

Housing: Aluminum AL6, Oven baked black paint

Housing Rating: IEC IP66, DIN, 89011

Weight w/o Cable: 1.7 Kg

Connector: IP66 Plug/Socket (connected!)

Cable Length: 1.5 M

Remote Lenses

Stainless Tubular Spot:

FOV: 1°or 7°; rated 180°C or 600°C . Option aviable: 0,5° x 25°

High Temperature Quartz Rod:

FOV: 1°; rated 1000°C.

Other shapes of FOV possible as option.

Fiber Optic Cables

Flexible Armored Stainless Sheath available in standard lengths from 2 meters to 10 meters in 1 meter lengths; rated 400°C.  

Longer optic cables, possible as option.

General Specifications