Anti-Mist Digital Hot Metal Detector

General Description

The MSE-HMD85 Hot Metal Detector is a fully digital “All-in–One” Hot Metal Detector uniquely incorporating a bar display showing the % IR input signal relative to the pre-set threshold as well as programmable thresholds and response times via simple programming switch action. This and the universal connection format means it provides the user with one universal Detector that can be used throughout the mill. The MSE-HMD85 Hot Metal Detector is the economical choice. Now there is no need to stock various Detectors for each location. Costly multiple inventory can be replaced by one Detector.

This MSE-HMD85 Hot Metal Detector is especially suitable where ambient temperatures are subject to large changes. In standard format, a large air cooled chamber vents via deflector in front of the lens to allow the use of non-instrument air and provides air purging. Alternatively, an optional sealed loop water coolant radiator accommodates tap pressure and a separate air purge inlet may be provided.

Housing Specifications

Housing: Aluminum AL6, Oven baked blue paint

Housing Rating: IEC IP66, DIN, 89011

Weight w/o Cable: 1.9 Kg (4.2lb)

Connector: IP66 with connected Plug/Socket

Cable Length: 1.5 M Standard up to 15 M available

Cooling: Air Cooled & Air Purged or Water Cooled & Air Purged

Air & Water Specifications

Air Pressure: 1 cu ft./min at 5 PSI for normal conditions

                    5 cu ft./min at 15 PSI for severe conditions

Water Pressure: 5 to 10 PSI, 40 PSI Maximum

Water Volume: Regulate between 0.2 - 0.3 liters/min.

Water Temp.:

For Ambient Temperature up to 70°C use ambient water below 20°C

For Ambient Temperature up to 80°C use water chilled up to 10°C

General Specification