industrial battery power recovery
USD $7,000 - $17,000 /Set
Min.Order:1 Set
Shanghai Linglam Electric Co., Ltd.
Don't throw away your used batteries !
Regenerate your batteries !
Give your batteries a second life !
Prolong batteries lifespan up to another years !
Save Your Money !
THE ONLY REAL BATTERY REGENERATOR SUPPLIER IN CHINA
Lowest Price !
WHAT CAUSE WASTE BATTERIES ?
SULFATION ( SULPHATION ) is a major problem faced by lead acid battery manufactures as well as battery users.
More than 80% lead acid battery fail to serve because of sulfation. Partial or full-fledged sulfation reduces energy storage capacity and lifespan of the battery, even cause battery break down.
Designed lifespan of battery: 5-10 years.
Actual lifespan of battery: 2-3 years.
WHAT IS SULFATION ?
When a battery’s energy charge is drained and needs to be charged during normal working cycles, sulfate crystals gradually build up on the pole plate, preventing the battery from effectively delivering current. The crystals in effect suffocate the battery.
The lead sulfate increases internal resistance, decreases the specific gravity of the electrolyte and The process of sulfation build-up is unavoidable. Worse yet, after 3-4 years the process accelerates substantially.
It is therefore very important to inhibit sulfation in the new batteries and also remove sulfation from a battery if it has been affected by sulfation.
A battery can be regenerated by removing sulfation ! ! !
BATTERY SULFATION REASONS
1. The battery was inactive for too long and not charged in time.
2. The battery was discharged too deeply, which cause battery loose water continuously.
3. The wrong charger was used.
4. A bad cell was left untreated.
5. The battery has reached too high/low temperatures.
6. The charge cycles were disrespected.
7. The battery was charged when it had not reached 80% depth of discharge (DOD).
8. The battery was used when it was not fully charged.
TRADITONAL TREATMENT TO SULFATED BATTERY
1. Large current charge or discharge.
Disadvantages: This is normal charging and discharging, only can solve light sulfation problem, easily cause battery overheat.
2. Add sulfuric-acid and chemical additives.
Disadvantages: It will cause battery chemical reaction failure and soften the plate poles.
3. Recycle, abandoned and buy new batteries.
Disadvantages: Harmful substance pollute the environment and increase enterprise cost.
INTELLIGENT & SMART BATTERY REGENERATION SYSTEM
1. Introduction:
LL-DCXF-01 battery regenerator is our patented product, which is a integration of battery regeneration technology and computer control technology, it has features of powerful function and highly intelligent.
It will automatically monitor the battery current, voltage and temperature during regeneration, and adjust working parameters as needed to finish the whole regeneration progress.
Use of pure physical, electronic and electrical ways to melt down hard sulfate that prevent damage on pole plate. Use our our own designed technology to maximum optimize battery based on different battery’s conditions.
Our battery regenerator successfully removes sulfation. This regenerates the battery capacity (80% and above), giving you the ability to reuse old and sulfated batteries. You can also use the battery regenerator for annual maintenance to strongly prolong the lifespan of your batteries.
2. Features:
1) Automatic detection, delay startup, soft startup and shutdown, etc.
2) Automatic protection of voltage/current/temperature limitation, etc.
3) Automatic alarms and suspension for open circuit, short circuit, reverse connection, overload, abnormal temperature, etc.
4) Multiple Function: Not only can be used for Rejuvenation, but also can be used for normal charging.
5) Friendly User Interfaces: Control and monitor processes via LCD touch-screen. It is very easy to operate with our given files.
3. Main Technical Parameters: industrial battery power recovery
Item | Parameter |
Input Power Source | 3 phase 380V 50Hz (Other voltage can be customized) |
Input Current | < 40A |
Protection Switch | > 40A MCB |
Output Current | DC 10A-400A |
Output Voltage | DC 12V-100V |
Maximum Input Power | 26KW |
Altitude | < 2000m |
Ambient Temperature | -20℃ to 55℃ |
Relative Humidity | < 85% (when medium temperature is about 20℃) |
Avoid | Conductive dust atmosphere |
Risk of fire and explosion | |
Direct exposure to rain and snow | |
Vibration and not level surface installation |
4. Application:
For all kinds of lead acid batteries (voltage 12V to 100V and capacity 80AH to 900 AH). Starting & Industrial Equipment, Renewable Energy & Power Plant, Material Handling (Forklifts), Military Equipment, Agriculture, Aviation, Car, Ship, Golf Cart, UPS, EPS etc. Sweepers, Tractors, Automotive, , SUV's Scooters, Marine -Power Boats, Yachts, Large Boats, Solar, etc.
ADVANTAGES AND BENEFITS OF USING OUR BATTERY REGENERATOR
1. Improve battery capacity, performance and efficiency.
2. Battery maintenance issues significantly reduced.
3. Charging time significantly reduced.
4. Longer run time, adds years of lifespan to batteries.
5. Prevent premature cell damage.
6. Increase the productivity.
7. Reduces maintenance cost.
8. Save on electrical consumption.
9. Reduces cost per production.
10. Avoid battery acquisition costs.
11. Reduce carbon dioxide and other harmful substance emissions, protect environment, save planet.
12. Good for economy sustainable development.
PLEASE KINDLY CONTACT US FOR MORE PRODUCT INFORMATION.
DO NOT HESITATE TO SAVE YOUR MONEY.
Erik
Tel & Fax: +0086-021-3921 6251
Mob & WhatsApp: +0086-18701908256
Skype: erik_linglam
Wechat: Linglam_Erik