8 Channels Sequence Power PC308

Sequence Power Instruction:

1. Mounting Holes

These G holes can be screwed the device on the standard audio cabinet with the screwdriver. Noted:before screwing the device,please add a piece of plastic pad to avoid the scrape on panel.

2. Main power control

When connected with power,press this key,channel 1-8 will be started on one after another. Noted:1.3s Sequence time for each socket to work normally.

3. Power force switch

After link with the power, press this switch, channel 1-8 will be force to work at the same time. Noted:even the power key of channel 1-8 were closed, once opened the force switch and then all of the channel will work as normal.

4. Label Instruction 

In order to the cllent can have a convenient operation, it can stick the label in the blank which is marked with the connected audio name.

5. Channel switch"ON"

After we open the main power switch, you can operate the "ON" key of channel 1-8 when it needed.

6. Standby indicator

The standby indicator lit on, it means the audio device linked the power and can operated basing on the practical application.

7.Voltmeter

When connected with power it display the actual working voltage.

8.Power assisted socket

Channel 9&10 assisted socket,which is internal parallel input the power directly and it without the sequence limited.

9. Power sequence sockets

Channel 1-8 power output sockets which its power controlled by sequence PCB or force power PCB.

10.Power Cable

5m2 power cable, 30A electric current work throught from this cable the strong working current. in stead of the small power socket, we suggest to use damper switch.

Sequence Power Picures: