Specifications

 L-35 PDT LED salon clinic beauty equipment

FOREWARD

LED cold light  is named Cold Laser too, which is a very pure short-spectrum single color. It is more safety than Laser, strong IPL, even more safety then sunshine, for it doesn’t have bad uv and infrared ray. LED light can penetrate 5cm deep into hypodermic, promote melanin decompounding, better at skin whitening. Except eliminating whelk, it targets P.acne mainly, kill P.acne first so as to clean skin acne. Cold light of LED will be widely applied to skin treated fields.  

THERAPEUTIC THEORY

LED with gene-type chip, its purity overpasses 99% of short-spectrum red, blue, yellow, green light, which is spread propaganda by NAALT and certificated by FDA. It uses gene-type biologic light, rapidly and effectively acts on hypodermis, then absorbed by mitochondria of cell, and produces the most efficient photochemistry domino offect, named enzymatic reactionkinetics, to increase cell activity, promote cell metabolism, enhance white cell ability to kill the bacteria, and district the activity and growing-up of tyrosinase, then block melanin information spread out, so as to stop melanin forming, then can repair and completely clean freckle. When LED acts on acne, it will be absorbed by the sensitization objects, like Propionibacteriumacnes , then can kill them to remove skin acne. This machine is the best choice to treat acne skin.

Application of Photodynamic beauty.

Red light (640nm):To promote metabolism, speed up blood circulation, improve skin moisture, increase skin collagen, enhance skin elasticity, smooth tiny wrinkle.

Applicable range: Anti-aging, to whiten skin, tender skin, make skin moisture and shine, fine, repair and dispel wrinkle, repair wounded part, treat sensitive skin, produce hair, improve hair losing because hair follicle aging, improve lack of blood, breathless and the function of the heart and lung, relax tire, improve sleeping and make the mood relax.

Blue light(470nm):To kill the bacteria, purify skin, activate cell, promote protein and collagen of bone compounding.

APPLICABILITY

1. Dispel freckle, sunspot, pigmentation, lower skin damage from daylight.
2. Treat whelk, mark of acne, hair follicle inflammation.
3. Lighten red mark and capillary vessel enlargement of the erythema acne.
4. Smoothen tiny wrinkle, tighten slack and aging skin.
5. Shrinken rough pore, improve rough skin.
6. Skin doom, no shine for poor metabolism, circulation.
7. Clean tire, relax pressure, improve sleeping quality.
8. scurf, hair losing for hair follicle aging.
9. Recover the face nerve with light pathological changes
10. Repair the wounded skin, repair the skin after skin rejuvenating, repair the skin sensitivity after tattoo therapy, repair the skin instantly after washing the eyebrow or tattoo by laser, repair the sensitive skin, repair the skin with burn, blain, pigmentation etc caused by excessive intensity or wrong operation during phototherapy.
11. Diminish inflammation, stop pain, promote the wound heal-up, repair skin after operation.

FEATURE

1. Rapid effect, short and comfort treatment, all are recognized by more consumers. Its general treatment shortens over two-part time than the oral dose and taking medicine for the part, no pain, no need to rest..
2. No any stimulation to the skin, no photosenstivity, very comfortable and relax during treatment. Easy operation and short treated time. One-time treatment only take 20 minutes, then one month can finish a period of treatment.
3. The beautician doesn’t need to wait at the side during treatment.
4. Firstly create prevention and cure on facial and sub-health, indeed display healthy beauty.
5. Duple safe protective device, easy operating, no need professional training.
6. Long life, stable capability, can work for a long time.
7. No hot effect, no any burn damage, no need repairing time. Light intensity is powful, strong penetration, can treat large area, short treated time.
8. No side-effect, no damage, no pain, suitable for any skin.
9. No need special therapy after treatment.
10. Lower cost of theapy then photon or laser machine.
11. Easy maintenance, no any requirements to therapeutic place.
12. New-type light source, high-luminance and high power illuminant.

TECHNICAL INDEX

Type of the light source: LED gene-type biologic wave light;

Wavelength of output:Red light: 640nm±5nm; Blue light: 470nm±5nm

Facula area: 180 x 260mm  

Time control: The menu set 0-30min, irradiator can be adjusted continuously.

Power suply: 220∨±22∨   50HZ

Power of output: 40mw/cm2

Temperature of the circumstance: 5°C ~ 40°C

Relative humidity:≤80%

Atmospheric pressure: 86.0Kpa ~ 106.0Kpa

Type of Fusegear:5A

OPERATION

Steps

1. Just start the machie, the window will show the time ‘00’m,press ‘STOP’ to stop the work condition, press ‘T+’ or ‘T-‘ buttons to set your needed time. Unit of time is minute, minimum is 1min.
2. Choose the needed lighted ‘LEDⅠ’ or ‘LEDⅡ’, both of ‘LEDⅠ’ and ‘LEDⅡ’ are check buttons. One-time is to choose, second-time is to cancel.
3. Choose the mode of LED light, press ‘Pulse’ one time, ‘LEDⅠ’ or ‘LEDⅡ’ will flash as one time one second, press ‘Pulse’ two times, ‘LEDⅠ’ or ‘LEDⅡ’will flash two times one second, press ‘Pulse’ three times, will return to continuous light mode. The original mode is that after starting the machine.
4. Press ‘Start/Stop’ button to start workin, the window will show ‘WORKING’. If LED is in continuous light mode, then ‘M’ will follow flash one time one second, but LED Ⅰor LED Ⅱ will flash according to your selective light mode, directly indicate the light mode. After working, the machine will automatically minus the time according your set time, and will stop working once the time becomes ‘0’. After the machine alarms ‘Di’ ‘Di’ sound, the time will return your last set time, but the machine is in stopping status. If you want to start the test treatement, please press ‘Start/Stop’ again.
5. During the treatment, you can change the light mode according the actual status,also can open or close one group of LED, if you want to pause or stop during treatemnt, pleae press ‘Start/Stop’ again.

THERAPEUTIC STEP

1. Completesl clean the treated skin, especially the make-up.
2. Gently apply skin care products or therapeutic products on the needed skin.
3. Wear the deep-color eyepatch or half-moisture thick cotton to cover both eyes to protect them.
4. Keep the shooted place 5-10cm far from the light source.
5. Start the photodynamics treatment and count the time 15-20 minutes.
6. After finish, no need apply any medicina on skin, not special care as well, but will feel a little warm after shooting.

CAUTION

a)        During shooting, please move decorations, like earring, necklace etc. away from the customer to avoid glistening.

b)        Be sure not to use the LED to shoot at eyes, suggestion is to wear deep-color eyepatch or half-moisture thick cotton to cover both of eyes.

c)        Choose your needed color spectrum according different requirements.

NO-NO

a)        Who has lupus erythematosus.

b)        Who is photosensitive, easily faint to the light.

c)        Who is having antibiotic to treat acne, like acheomycin, Isotretinoin.

POST SERVICE AND MAINTENANCE

Post service

We will guarantee the quality of our equipment, normally there is no quality problem.

1. If there is a deficiency, please email or call us on the reasons, it would be best if this can be dealt with by email or telephone. Because some of the problems are caused by using the machine in a wrong way.
2. We suggest the client to take photos of the area where the problem occurs, we will pass them to our technician, and our technician will give a satisfactory answer within 1-7 working days.
3. If the problem comes from the spare part, we could consider in changing the spare part for our client, which could be sent with his/her next order. If the next order is uncertain, we could pay freight cost to send the spare parts.
4. If the problem comes from the main device, we could advice our client to post the device back to our company for repair by ordinary post, or we could re-send a new one to our client. If the cost of posting the problematic device back to JIMY is more than the value of a new device, JIMY would take it into consideration, according to the actual status; apply to re-send a completely new device back to our client.
5. If the inferior equipment very big or expensive, not convenient to send back by post office, we will give you an appointed Hong Kong place, you can send Hong Kong first. Jimy will ask a cooperated forwarder to take it back. Jimy will pay all charges from Hong Kong to our office. Once we check the equipment is the quality inferior, we also agree, in your next order, to deduct the freight from the customer’s office to Hong Kong if you fax or email us relevant shipping receipts and invoice.
6. Please make sure, if you send the inferior one to us by air etc. without any advanced notice, Jimy will not pay relevant air freight and custom fee.

All in one, we will try our best to serve you and also need your fully cooperation. Thanks.

Remarks:

1. The term of maintaining guarantee is a year from the purchasing day according to the receipt. Others not included in maintaining guarantee or over the time, we also supply to maintain and renew according to our charging standard. Please contact with the dealer if need change of purchase the parts and easily expendable products.  
2. We won’t supply maintaining guarantee if troubles as below:
1. Disassembling the machine by urself without getting permission from supplier.
2. Fall it down by mistake
3. Ba Maintainment.
4. Incorrect operation against the User Manul.
5. If you make any design change on the machine,we will stop the maintainment at once.