Specifications

L-13 Multifunctional hair removal IPL E-light Permanent Hair Removal,IPL Depilation Machine For IPL Depilatory Pigment Removal

For your safety the designers and manufacturers of IPL Hair Removal & Skin Rejuvenation System tried every means to avoid the strong light hurting people and environment.

Therapeutic theory        

Tender skin:The strong Pulse multi-wavelength wide-spectrum colorful light irradiates the surface of skin directly acts on the abnormal pigment under skin and target tissue in blood vessel breaks down the irregular pigment cells closes the abnormal capillary vessel At the same time strong pulse light will be absorbed by the moisture in collagen and the thermo-effect will stimulate the hyperplasia of collagen so as to strengthen the elasticity of tender skin and remove wrinkles

Denuding:Strong pulse light with specific wavelength irradiates hairs and is absorbed selectively by hairs and hair follicles The skin gets high temperature instantaneously and the hair follicles putresce while keep normal skin and sweat gland in good state.

7. Adapting range:

Tender skin: freckle age pigment sunbur inor wrinkle crassitude pore dilation of capillary vessel acne etc.

Denuding:hair on lip beard armpit hair body hair etc.

 8.Primary Technical Parameter.

9. Characteristics of Photons Tender Skin

Treat the face and change the status integrally; denude thoroughly and no rebounding; quick safe little suffering the operation takes little time and dosen’t affect regular work Easy to learn to control and strict in quality the machine is in steady state

10.How to Use

Temperature 10°C-30°C

Relative humidity 40%-60%

IPL  oparation Manual

oporation introduction-1.

                                                                                                          (Pic.1)

Turn on the power, and a picture will turn out on the screen (pic.1) it takes about 2 seconds to enter into the treatment program platform.

1.       treatment program platform

(Pic.2)

After entering into the treatment program platform(pic.2) press up and down to choose haie-removal or skin-rejuvenation treatment Press "ENTER"and the system will automatically choose the responding lighthandle On the other hand we can press "SIMM"first to light the lighthandle and then choose the treatment program Press ‘MEUN’to enter into the system setting,where we can have more treatment modes

recharge

After choosing the treatment mode, press ‘ENTER’ to recharge(pic.3). when recharging finished, the system will automatically enter into the treatment platform(pic 4).

 2     1treatment platform

(Pic.4)

After entering into the treatment platform, we can chang the treatment parameters to adjust to the treatee. Press ‘SIMM’ to draw back from the treatment platform and turn out the lighthandle. Press ‘ENTER’ to draw back to the treatment mode menu to choose other treatment mode.

Lighthandle window: show the working treatment mode and the type of lighthandle.

Energy window:show the degree of the energy of the lighthandle.

Treatment parameters: show the parameters of the working treatment

Tips window: tips of function of the button.

change the parameters

(Pic.5)

Changes of the treatment parameters can change the energy emitted by the lighthandle, flency and flences, and to satisfy the needs of different treatment modes.

adjustable treatment parameters: (pic 6)

Energy output:  energy can be changed directly during the treatment procesure from 0 J/cm² to 50J/cm² , showed in the energy window. Press up or down  to increase or reduce the energy. Press them for seconds to speed the adjustment.

Cycle of Pulse: 1,2,3,4s.

Numbers of Pulse: 1-6pcs/s

(First Pulse)Time1: 1-10ms,

Dalay 1:1-100ms.

(Second Pulse)Time2 :1-10ms

Dalay 2:1-100ms

(Third Pulse)Time3:1-10ms

Press or to change the parameters.

On the treatment platform, press ‘MENU’ to ernter into the parameter menu. Press ‘MENU’ to select the treatment parameter options. Press up or down  to change the parameters and up for increase and down  for reduce. Press ‘ENTER’ to draw back from the parameter menu and to the treatment menu.

Pulse

                                                                    (pic.6)

treatment

(Pic.7)

 After recharging wait for about 10 seconds and the temperature of the lighthandle is reduced and it’s time to start treatin Press on the "work button" on the lighthandle and the tips zone shows"working" At the same time the lighthandle can start working according to the parameters Any botton is unavailable when the "work button" is pressed on  During the treatment parameters can be changed After treatment press "SIMM" to draw back from the treatment and turn out the lighthandle and back to the treatment menu. 

4. reset and check the parameters

On the treatment menu platform press "MEUN"to enter into the functional parameters platform(pic.8). press or to select the parameters and press "ENTER" to change the function option. Press ‘MEUN’

to draw back from the functional parameters platform to the treatment mode platform

system function setting

language  Chinese or english

botton sound on or off

energy adjustment sound on or off

System clock press "MEUN" to enter into the adjustment. Up for hour and downfor second adjustment"ENTER" for confirm the adjustment.

Save setting  save the system settings and back the main platform.

14. Contact Us Note

The lifespan of the treatment handle one standard treatment handle can shot 20 000 times.

After shooting 20 000 times, the effect of the pulse light might reduce. The treatment handle getting 20 000 times is out of the service guarantee and need change new treatment handle.

Skin-test (Essential)

Skin test is essential before the treatment for the safety operation The details is as following:

1)    Skin test should be performed before the treatment for the client when the first time The test patch should be under the ears or other skins not influencing the facial beauty.

2)    Clean the test patch with pure water and wash- milk apply a layer of cold coupling gel at the test patch Take the treatment handle from the

3)    supporter and direct the light guide to the test patch Trigger 2-3 shots (1/3 area of the spot size overlapping the treatment site is permitted.) and wait for 2-3 minutes to examine the test patch:

• If lightly swelling and/ or reddening at the test patch appears several minutes later continue the treatment with the same settings of energy level and pulse type.
• If no visible changes at the patch appear continue the test with 2j/cm² higher energy level Re-perform the test for several times until the above situation happens.
• If the skin show adverse effect or excessive reddening and/or swelling at the test patch just after shot continue the test with lower energy level.            
  

4) For hair-removal with the Hair-removal treatment handle (630-1200nm wavelength)

5)   First cut off the hair and leave only 1-2 mm Clean the test patch with pure water and apply a layer of cold coupling gel at the test patch Take the treatment handle from the supporter, and direct the light guide to the test patch. Trigger 2-3 shots (1/3 area of the spot size overlapping the treatment site is permitted) and wait for 2-3 minutes to examine the test patch 

• If swelling and/or reddening around the hair follicles appear within a few minutes continue the treatment with the same settings.
• If no visible changes appear around the follicles continue the test with 2j/cm² higher energy level.
• If the skin shows adverse effect such as excessive reddening or swelling lower the energy level.
  

Shipping Way:

FEDEX,DHL,TNT,UPS,etc