Pearl cotton film EPS foaming sheet manufacturer
USD $1 - $280,000 /Set
Min.Order:1 Set
Longkou Unity Machinery Equipment Co., Ltd.
Pearl cotton film EPS foaming sheet manufacturer
Include 3 sets of machine
1. PS Foam Sheet Extruder
2. Fully Auto Forming and Cutting Machine
3. Recycling Machine
This line can make PS foam tray, absorbent foam tray for meat, foam burger box, foam fast food box, foam egg tray, foam bowls and so on.
A. The raw material is General purpose polystyrene (GPPS) .
B.The general process flow of the ps foam food container machine as below:
aa. The ps foam sheet is made by the ps foam sheet extruder
bb. The foam sheet shaped by the vacuum forming unit, cut the shaped sheet into finish products and stack.
cc. The sheet scrap will be recycled by the recycling machine .
C. Brief discription of PS foam food box production line.
1. PS Foam Sheet Extruder (TYPSP-90/120):
Main Technical parameters
Model | Unit | PSP70/90 | PSP90/120 | PSP100/130 | PSP120/150 |
Extruder |
| 70/90 | 90/120 | 100/130 | 120/150 |
Foam rate |
| 10-20 | 10-20 | 10-20 | 10-20 |
Width of product | mm | 640 | 640-1040 | 640-1040 | 640-1200 |
Cutting method |
| Single cutter | Double cutter | ||
Thickness of product | mm | 1.0-3.0 | 1.0-3.5 | 1.0-3.5 | 2.0-5.0 |
Cooling method |
| Cooled by wind and water | |||
Output | kg/h | 50-80 | 100-170 | 150-230 | 230-320 |
Installed power | KW | 120 | 150 | 180 | 260 |
Dimensions(L×W×H) | m | 26×4.0×2.8 | 30×4.1×2.8 | 36×4.2×3 | 38×4.2×3.2 |
Total weight | T | 10 | 12 | 15 | 18 |
2. Fully Auto Forming and Cutting Machine (TY-1040):
Forming and cutting procedure is done in the same machine, labor saving, high efficient, low labor intensity and production cost. Production process is to put foam sheet into forming machine, end product and wastage will come out from the rear part, two workers is enough for whole production line operation. It can be used to produce PSP/EPE /HIPS/PVC/PET material. Product can be used in the food, medical, electric parts, tourism, toys, etc.
Main technical parameters
Model | Unit | TY-1040 |
Max. forming area | mm2 | 1000×1100 |
Max. forming depth | mm | 80 |
Production efficiency | s/die | 3 - 8 |
Forming pressure | T | 15 |
Mounted power | kw | 168 |
Total weight | T | 16 |
Installation size | m | 13×2×3.2 |
3.Plastic recycle machine
Plastic recycle and pelletizing machine is designed to reclaim the foamed polystyrene materials almost identically to new ones with its own superior filtering performance
Main technical parameters
Model | Unit | TY-180+120/100 |
Screw diameter | mm | 180+120/100 |
Motor | kw | 30 |
Heater | kw | 25 |
Extruder capacity | kg/h | 80-130 |
Cooling water tank | mm | 1810×410×225 |
Granule cutting motor | kw | 2.2 |