BYM series module is made of BYF series ceramic blanket, folded or piled up with blanket sheets and pre-compressed to a specified density. Several types of anchor can be selected for different installing demand.

Production Specialty

The anchor system is remote from hot face, maintaining the metal components at a relatively low temperature.

The pre-compressing of the accordion-pleats, released after installation, gives tightly sealed inter-modules joints with both configurations, this counteracts shrinkage that occurs at operating temperatures and help prevent joins from opening up in service.

 Low thermal conductivity giving high thermal efficiency.

Since the module has good resilience, the furnace or kiln structural steel need not be totally rigid. This provides an opportunity for innovative furnace and kiln designs.

Light weight, giving low heat absorption in the insulation. Good resistance to thermal shock. The heat-up and cool-down stages of furnace or kiln operating cycles can be greatly accelerated.

Installation and Setscrew modes

The Modules can be installed in Parquet pattern and Soldier course.

Tow setscrew modes: in-installation and out-installation.

Use different anchors in different applications

Application

Ethylene, ammonia reformers, hydrogen reformers, oil refine, ductwork

Annealing furnace.  Reheating furnace. Continuous annealing and coating furnace. Transfer ladle lids. Duct

Ceramic: Tunnel Kilns. Intermittent kilns. Ductwork

Aluminium: Soaking pits and Covers. Bale out Furnace