Specifications
Polyethylene pipe production lineaaPipe Material:LDPE
aaHeat Insulation
aaHigh protection against surface abrasion
aaTop
Polyethylene pipe production line Brief Introduction:
EPE foam pipe is a kind of new-type foam material and it is widely used in the jacket of air conditioner, pipeline heat insulation, toy guardrail and recreation places etc. due to its high foam ratio, good elasticity and heat preservation.
EPE foam pipe application:
Non cross-linked closed cell polyethylene foam tube for plumbing, heating, refrigeration and air conditioning insulation
General characteristics:
-- polyethylene based products-inert material, highly resistant to chemicals
--environmental friendly products
--100% recyclable
--flexible low weight material, easy to slip and install
--low thermal conductivity
--compatible with all sealing materials
--fine round closed-cell cellular structure assures: negligent absorption and water permeability
--excellent impact and compression resistance enven for low thickness
Main Technical Parameters:
Type | Unit | EPEG-70 | EPEG-75 | EPEG-90 | EPEG-105 | EPEG-120 |
L/D |
| 55:1 | 55:1 | 55:1 | 55:1 | 55:1 |
Screw speed | r/min | 5-60 | 5-60 | 5-60 | 5-60 | 5-60 |
Foaming rate |
| 20-40 | 20-40 | 20-40 | 20-40 | 20-40 |
Pipe Specification | mm | 20-40 | 20-50 | 30-80 | 40-100 | 50-120 |
Rod Specification | mm | 6-30 | 8-35 | 15-50 | 18-70 | 20-80 |
Cooling method |
| Water cooling | ||||
Installed capacity | kw | 36 | 40 | 90 | 100 | 120 |
Dimension | m | 15×1.3×1.7 | 16×1.3×1.7 | 18×1.6×2 | 20×1.8×2 | 22×2×2 |
Total weight | t | 3.8 | 4.2 | 6.6 | 7.2 | 8.6 |
Sample Products Pictures: