guns fiber laser engraving machine ,laser marking machine
USD $12,000 - $18,000 /Set
Min.Order:1 Set
Shenzhen Hailei Laser Technology Co., Ltd.
good beam quality :
1: quality is much better than traditional solid laser engraving machine, the output is TEM00,
2:focus on the spot diameter less than 20 um.
3: the Divergence Angle is only 0.3mrad
4: Especially suitable for precision engraving.
5: Lightning conversion efficiency to a maximum of 30%, the power consumption less
than 500 w, save energy consumption expenditure.
6: Laser is no need for any maintenance, also need not adjust or clean lens
Advantages:
1, high-definition: the resolution is measured by micron; It is two times clearer that traditional machine.
2, Less power consumption: occapy traditional consumption of one and two-fifths to one and ten.
3, high-speed:the speed is three to five times faster than traditional machine.
4, stability: the stability of machine is much better than similar counterpart.
5, long life:its lifespan is ten times longer than traditional machine.
laser long service life :HL-FM series optical fiber laser engraving machine use laser diode, average working time is 100000 hours, so, HL-FM series laser engraving machine service life is long
Small size, applicable in the bad environment:the processing speed is 2-3 times than traditional laser engraving machine
Fiber Laser Marking Machine principle: Fiber laser using an integrated overall structure of the optical contamination with other lasers do not have high efficiency, long life and less maintenance performance.
Optical fiber laser parameters
average output power | 10w |
power adjust range | 10-100% |
repeat frequency | 20-80KHz |
Output beam quality | 1.4-1.8 |
Divergence Angle | 0.3mrad |
Electro-optic conversion rate | 30% |
engraving performance
engraving style | Stationary or mobile marking |
engraving line depth | 0.01-0.2mm |
Minimum gathering spot | 0.01mm |
Minimum character | 0.1mm |
Repeat precision | 0.002mm |
engraving speed | 12000mm/s |
engraving format | all kinds of format |
Standard character type | Vector type and bitmap graphics, text |
Operating system | WIN98 ,PLT,PCX,DXF,BMP,SHX,TTF |
engraving scope | 50×50/100 × 100/150 × 150mm |
Size | 550mm × 900mm × 1200mm |
Power supply | 100-240v,500w |
applycation range :