Specifications

LHD underground loader
1. Rated load:2.0 ton, bucket capacity:1m3
2. SAUER-DANFOS pump
3.2000 hours warranty.

1.Power system adopts YUNNEI turbo-charged engine, big power, low emissions.

2.Using technology leader slewing structure, hydraulic steering, rear axle swing compared to traditional forms, lower failure rate, easy to maintain.

3.Walk system uses hydraulic torque converter, power shift transmission, and improve reliability.

4.Operating system adopts pilot control, making the operation more simple work, work more efficiently.

5. Working brake is a spring brake, hydraulic release, and is equipped with an emergency braking system, the brake is safe and reliable.

6.exhaust system is equipped with imported purifier water filtration system, greatly reducing air pollution.

7. vehicle chassis plate thickening, enhanced vehicle steel bucket shovel blade madeof high strength alloy steel, wear resistance to shear, V-type structure, reducing scooping resistance and longer life.

8. Adopt 9.75-18 puncture resistant smooth rubber tires,

9. The machine can be shove

ling, loading, transport, unloading one operation, compact structure, convenient operation, high efficiency operation for recovery of mines and tunneling mucking, and workplace and road construction formation, transport of materials and other auxiliary operations.

Specification

Model	XDCY-1A
Bucket capacity (m3 )	1.0
Rated load (t)	2.0
Weight (t)	7.0
Min turning radius (outside) (mm)	4390
Traveling speed (km/h)	0-9.5
Forward gear I	0-5
Forward gear II	0-9.5
Reverse gear	0-9.5
Grade ability	20
Overall length (mm)	5717
Overall width(mm)	1300
Overall height(mm)	2000
Wheel base (mm)	2242
Max. dumping height(mm)	1250
Dumping reach (mm)	860
Engine model	YUNNEI4102 Turbo
Rated power(kw)	58
Tire type	9.75-18

  

1 unit/20GP  

  

Service

As a leading supplier in this field, we can provide customers with technical support and training course before the order is made. When the order is confirmed, the delivery cycle deserves special attention, and it changes with produce model.Usually it is about 10 days for standard machine machine and 30 days or so for special types, while spare parts are enough for one-year use will also be deliveied and along with the product. Moreover, one year warranty or 1500 hours is provided. During this period, we can replace damaged components for free.

Special service

Aside from the items above, there are also some special services,such as design service, customized product, training course, etc. The following paragraphs are brief introductions on these aspects.

Design service

Our design service means that our customers should supply relevant product drawings or specify their requirements, and oru technicians will work out a design plan accordingly and then arrange production as customer requested. The design contents incluecab style, size of radiator, attachments of loader and more.

Customized product

Under the condition that customer made products is needed,please send a corresponding request to us, the our sales department and technology department will discuss about the plan.If the plan is confirmed as a feasible one, we will start manufacturing progress.The acceptable bespoken items cover loader color, tire specification, attachment of machine, etc.

Training service

When it comes to training service, we offer technical manual to our customers, and we will provide group customers with drive and maintenance courses.In addition, OEM is also available.

  

 

1, why do loaders not allow to glide without power?

The loader’s hydraulic steering system depends on engine’s power , the steering is very difficult to control when the engine stalled, it must be restarted to carry out hydraulic steering.

2, Why can not press throttle deeply when diesel engine has just started?

A: Diesel engine should be operation at low-speed after started, the purpose is here: First, to warm up, that let the body ministries to take the heat slowly and evenly, avoiding mechanical injury; Second, lubrication, let diesel engine lubricate parts gradually to achieve work lubrication state to avoid friction damage.

3, Why does construction machinery start only when the machine temperature rose to 50 degree celsius?

A: The purpose is to protect the diesel engine from damage. The mechanical start is bound to increase the engine load, and to increase the amount of oil. Machine temperature is too low, the diesel combustion is not complete, along the cylinder wall into the crankcase, will not only affect the lubrication of the cylinder wall, and will dilute the oil sump, lower lubrication properties, and reduce the life of the diesel engine. Meanwhile, the dryer temperature is too low, the oil viscosity is too large, poor lubrication effect of the various parts, prone to frictional damage.

4, What’s the harm to add engine oil too much?

A: (1) increase the resistance to the rotation of the crankshaft, reducing the output power of the engine

(2) make a large number of oil into the combustion chamber and fire, causing blue smoke , a large number of carbon in the combustion chamber , accelerate the wear of the cylinder and piston

(3) increased oil consumption

5, Water tank boil, why can not add cold water suddenly?

A: The cold water causes the engine body’s temperature change rapidly, so that the cylinder block and cylinder head crack, resulting in engine damage.

6, Why does the diesel engine can not operate at high-speed for long time?

A: Three major hazards at high-speed operation:

(1) the friction loss of the various moving parts increases, and reduces the life of a diesel engine.

(2) the engine output power is reduced, the fuel consumption increases.

(3) increased oil consumption, poor lubrication effect. Because of the high-speed operation, the oil ring can not scrape off the oil on the cylinder wall, then into the combustion chamber to fire; oil viscosity decreased due to high temperature, can not achieve normal lubrication effect.