Solderless Car Radio DIN Motorola Female Jack Socket Screw on Aerial Adapter Converts bare wires
USD $0.19 - $0.99 /Piece
Min.Order:100 Pieces
Changzhou AIOpower New Energy T&S Co., Ltd.
universal antenna cable adapter connectors standard factory male antenna plug Automobile Accessories
car Antenna Adapter cable Din plug to standard factory jack with power wire
Factory Antenna Adapter to Aftermarket Radio Adapter for Select 1987-2006 Vehicles
Antenna adaptor extension cable Jaso plug to jack port,Din male to female,factory plug to jack
This Screw-on connector will convert the aerial connection from bare wires into the common ISO connector required for most head units.
Ideal if your car's aerial connector has been cut off.
Converts bare wires to ISO (female) connection.
Product Dimensions: Lenght 56.4 x Diameter 12 mm.
1. A Motorola connector also known as a motorola antenna plug is a common coaxial cable RF connector used primarily in the automotive industry for connecting the coaxial feedline from the antenna to the radio receiver. It is also sometimes used for connecting scanner antennas to scanners. The male plug somewhat resembles an RCA connector in size and shape, but instead of being concentric to the pin, the sleeve is "folded" back over the coax.
The pin is soldered to the center conductor of the coaxial cable coming from the antenna, and the grounded side forms a 1.5 inch (38 mm) long sleeve around the coax. The sleeve usually contains one or more longitudinal spring surfaces, which provide reliable electrical contact by wiping against the mating female socket.
Typical Motorola plug found on consumer auto accessory antenna coaxial cables. Note the spring section on the top of the shield connector. | |||
Type | RF coaxial connector | ||
---|---|---|---|
General specifications | |||
Diameter | 0.365 in (0.93 cm) barrel | ||
Cable | Coaxial |