Product Details

If you are interested in our products, please contact us. thank you!

Product Description

First of all, our products are custom based.

Specifications

Ceramic Band Heaters
1. Ceramic insulation
2. Cr20Ni80 wire,SS304
3. ISO9001, CE, RoH

Description: Ceramic Band Heaters

Mainly used for extrusion,casting and down-stroke machines.The operating temperature can reach up to 600 degree C.The maximum surface loading rate is 8 w/ cm2. its adcantages include fast speed of heating , high rate of heat utilization ,excellent energy saving(energy consumption is reduced by 30%),high resistance of high insulation rate.It is one of the most suitable:electric heaters for plastic extrusion and injection machines,plastic hollow and blowing machines and chemical fibre moulding machines.

Application Cases

1.Plastic injection moulding machine
2.Hollow shaping machine/Blow-molding machine
3.Extrusion machine/Co-extrusion line
4.Raw material processing equipment
5.Pelletizing equipment
6.Granular machine
7.All types of plastics processing machines

Model	Dimension(mm)	Voltage(v)	Power(w)
Φ125*51	125*51	230	500
Φ 105*66	105*66	230	800
Φ 185*51	185*51	230	1100
Φ 190*85	190*85	230	1500
Φ 220*75	220*75	230	1700
Φ 180*90	180*90	230	1700

Key Technical Indexes

1.Use condition:environment temperature -20~+60 degree C,relative temperature<80%

2.Leakage current:<0.5MA

3.Insulation resistance:>=5M

4.Ground resistance:<0.1

5.Voltage resistance:no electric breakdown for 1 minute under 1500v

6.Temperature endurance:500-800 degree C

7.Power deviation:+5%-10%

Packaging & Shipping

Packaging:ceramic heater in plywood case outside if needed.

Shipment:1.small quantity by DHL,FEDEX 2.Bulk goods by Sea Freight.

Our Services

Other services we are committed to offer include:

1. Flexibility with minimum order requirements
2. On-time delivery
3. Free replacement if any product quality issues within guarantee period
4. Technical support
5. Simple ordering procedure: Email, fax or mail.

FAQ

Order Guide

Please specify the following when ordering.

The inner diameter (mm) and length (mm) of heaters
Thickness of heaters
Terminal length (max & min) and the distance of terminal length
The diameter, length of cooling tubes and the distance between them.
Voltage and power density
Gap of two pieces if applicable
Wiring type and position
Whether need air blowers
Content of the stamping if needed
Order quantity
Delivery date

* It’s better to provide us with the drawings/pictures

Others: position of terminal box, the position and size of the hole for connecting thermocouple OR of the incision, whether need to cast in the terminal