Product Details

Product Description

Rib- lath, ribbed expanded metal lath, Wall plaster mesh, is expanded metal-lath stiffened with longitudinal ribs. The furring design of the mesh provides efficient background plaster for construction of partition, suspended ceilings and refurbishment works. The advantage of ribbed- lath over metal-lathing is that support centers can be increased or widened.

Flat Rib Lath is available in paper-backed in either K (Kraft) paper, or with D paper.

Detailed Images

Specification

Expanded Metal Flat Rib Lath, Plaster stucco base metal lathing, ribbed expanded metal lath

Model	Rib Height (mm)	Rib Distance (mm)	Width (mm)	Aperture Size (mm)	Remark
AB-1/8-4-75-450	1/8"	75	450	9*17	9-rib & 4-aperture
AB-3/8-4-75-450	3/8"	75	450	9*17	9-rib & 4-aperture
AB-1/8-4-75-600	1/8"	75	600	9*17	9-rib & 4-aperture
AB-3/8-4-75-600	3/8"	75	600	9*17	9-rib & 4-aperture
AB-1/8-4-75-750	1/8"	75	750	9*17	9-rib & 4-aperture
AB-3/8-4-75-750	3/8"	75	750	9*17	9-rib & 4-aperture

Model	Rib Height (mm)	Rib Distance (mm)	Width (mm)	Aperture Size (mm)	Remark
AB-1/8-8-100-600	1/8"	100	600	7*11	7-rib & 8-Aperture
AB-3/8-8-100-600	3/8"	100	600	7*11	7-rib & 8-Aperture
AB-3/4-8-100-600	3/4"	100	600	7*11	7-rib & 8-Aperture
AB-5/8-8-100-600	5/8"	100	600	7*11	7-rib & 8-Aperture
AB-7/8-8-100-600	7/8"	100	600	7*11	7-rib & 8-Aperture

Model	Rib Height (mm)	Rib Distance (mm)	Width (mm)	Aperture Size (mm)	Remark
AB-1/8-4-100-600	1/8"	100	600	9*20	7-rib & 4-aperture
AB-3/8-4-100-600	3/8"	100	600	9*20	7-rib & 4-aperture
AB-3/4-4-100-600	3/4"	100	600	9*20	7-rib & 4-aperture
AB-5/8-4-100-600	5/8"	100	600	9*20	7-rib & 4-aperture
AB-7/8-4-100-600	7/8"	100	600	9*20	7-rib & 4-aperture

Model	Rib Height (mm)	Rib Distance (mm)	Width (mm)	Aperture Size (mm)	Remark
AB-1/8-8-150-600	1/8"	150	600	11*17	5-rib & 8-aperture
AB-1/4-8-150-600	1/4"	150	600	11*17	5-rib & 8-aperture

Model	Rib Height (mm)	Rib Distance (mm)	Width (mm)	Aperture Size (mm)	Weight
AB-3/8-8-100-686	3/8"	98	686	7.2*9.5	4.3kg
AB-5/8-8-100-686	5/8"	98	686	7.2*9.5	5.6kg
AB-3/4-8-100-686	3/4"	98	686	7.2*9.5	6kg
AB-7/8-8-100-686	7/8"	98	686	7.2*9.5	6.5kg

Application

Rib lath, ribbed expanded metal lath, 3.4 expanded metal lath is idea for refurbishing damaged or aged masonry walls, when a key for rendering is not certain due to disintegration or softening of the wall face.

Lath should be fixed with apexes of ribs against the wall, edge ribs of sheets nesting into each other should be wire-tied every 15cm and ends of sheets should be lapped not less than 2.5cm and nesting ribs securely tied together. Stainless steel fixing should be used at sufficient intervals to hold the lath firmly in position.

Installation

Fixing of Rib lath Sheets

Rib lath is fixed so that the tip of the rib is put against the supporting background. The rib of the sheet should run at right angles to any supports. Make sure that sheets are superposed by a minimum of 50mm end to end and by 25mm width ways and that the ribs are nestled together.

Wood Support

Rib lath is fixed at each rib to wood supports using plasterers' nails or staples. Make sure that compatible corrosion resistant fixings are used, for example, please don’t use galvanized fixings for stainless steel.

Metal Support

Rib lath is fixed at each rib to metal support using 1.63mm galvanized or stainless steel tying wire. When joining rib lath sheets overlap the edge ribs and tie the edges with 1.22mm tying wire at 150mm centers.

Solid Background

Rib lath can be fixed to a solid background using a suitable fixing which holds the ribs firmly against the background. Where sheets are installed perpendicularly, fixings should be positioned through all ribs at 600mm centers to make sure there have enough stability.

Packaging & Shipping

Normally, 3.4 expanded metal lath, 620piece per pallet. 6pallets for one 20' container. packing method can be customized accoring to client's requirements.

Related Products

We can produce various building mesh, more pictures about strength and products.

Diamond Metal Lath, stainless steel expanded angle beads, for wall corner beads in corner guards, Expanded Wire Metal Lath

Angle beads

perforated angle beads

Company Introducation

We a munufacturing and trading combo, produce and export building mesh, like Angle Beads, Coil Mesh, Expanded Diamond Metal Lath, etc. for several years to overseas.

We have rich experience in this industry, with skilled team and advanced machines, welcome to enquiry our product.

Competitive Advantages

Good and High Quality Control ,
Prompt Delivery ,
New Product ,
Competitive Prices ,
Earth-friendly Products

Contact: Fancy Yuan

Web:

Cell/ WhatsApp/ Viber/imo: +86 13921196631

Our Fair

Check out our new booth! Come see the demo of our products and talk with our sales staff about your product needs.
"IBS & KBIS 2016" from Jan 19th to 21st in Las Vegas
Booth# C3434

FAQ

1. Are you a trading company or manufacturer?

We a manufacturing and trading combo.

2. What is your factory strength?