air cooled condensing unit with brand compressor

semi-hermetic condensing unit

Product Features:

1. Product name: the condensing unit
2. compressor brand: BITZER, MANEUROP, COPELAND, TECUMSEH, SANYO;
3. Capacity: from 1/3HP up to 50Hp ;
4. Compact structure ;
5. High efficient forced air cooled type condenser, high heat exchanging capacity, low power cost ;
6. Suitable for medium/high temperature, low temperature, super low temperature ;
7. Suitable for refrigerant R22, R134a, R404a, R507a ;
8. For refrigerant R134a, R404a, R507a, polyester oil is pre-loaded ;
9. Standard configure of standard forced air-cooled condensing unit: world-famous compressor, crankcase heater, oil pressure relief valve(except series of semi hermetic recips) , air cooling condenser, stock solution device, pressure controller, pressure gage, expansion valve , solenoid valve;
10. Unit with protective cover: protective cover is easy to installation and has beautiful outlook.

Product Application:

They be used in hotels, restaurants, medicines, agriculture, chemicals industries all other place where cold storage is needed.

Installation Instructions:

1. Condensing units must be installed in well ventilated areas. The distance from the wall should not be less than 0.5meters to prevent poor air flow and heat dissipation.
2. Such as the outdoor unit should be installed in housing with rain, dust, direct sunlight;
3. All levels of the compressor suction pipe should slope to facilitate oil return;
4. The system components should be dried before installation, dust treatment, to keep the system clean and dry;