BONESN W208-1AL potentiometer single-turn potentiometer glass glaze trimpot
Negotiable /Piece
Min.Order:100 Pieces
Sichuan Qixing Electronics Co., Ltd.
Details of Products:
Electrical Characteristics | Range of nominal resistance | 10Ω~1MΩ | ||||
Resistance tolerance | ±20% | |||||
Terminal resistance | ≤±1%R or 10Ω | |||||
Contact resistance variation (CRV) | ≤±3%R | |||||
Insulation resistance | ≥ 500MΩ (100V AC) | |||||
Withstand voltage | 250V (DC or AC peak value) | |||||
Effective electrical travel | ≥210° | |||||
Environment Characteristics | Rated power | 0.5W ( 300V max) | ||||
Temperature range | ||||||
-55°C~+125°C | ||||||
TCR | ±250×10-6/°C | |||||
Collision (390m/S2, 4000 times) | ΔR≤±1%R | |||||
Vibration (10-500HZ, 0.75mm, 6h) | ΔR≤±1%R, ΔUab/Uac≤±2%R, Electrical break≤100μS | |||||
Temperature variation (-55°C/30min, +125°C/30min, 5 cycles) | ΔR≤±2%R,ΔUab/Uac≤±2%R | |||||
Climate category (IEC68-2-2) | ||||||
ΔR≤± (10%R+0.1Ω), Insulation Resistance≥100MΩ | ||||||
Electrical endurance (0.5W, 1000h) | ΔR≤± (5%R+0.1Ω) | |||||
Mechanical endurance (200 cycles) | ΔR≤± (20%R+0.5Ω), | |||||
Steady damp heat (IEC68-2-3, Ca, 96h) | ΔR≤± (10%R+0.1Ω), Insulation Resistance≥100MΩ | |||||
Physical Characteristics | Total mechanical travel | 250° | ||||
Starting torque | ||||||
≤35mN.m | ||||||
Stopper torque | ||||||
≥75mN.m | ||||||
Soldering Conditions | ||||||
240°C-260°C(5 seconds) |
Function of potentiometer:
A potentiometer is a manually adjustable electrical resistor that uses three terminals. It is a simple electro-mechanical transducer. It converts rotary or linear motion from the operator into a change of resistance, and this change is used to control the levels of output. It is sometimes known as POTS.Potentiometer is an adjustable electronic components,which plays main roles in the circuit on the following several aspects
1.As a voltage divider:Potentiometer is a continuously adjustable resistor. When potetiometer’s stem or sliding handle move on the resistor body, the output of the potentiometer can be obtained output of voltage with certain related to the potentiometer applied voltage and movable arm or travel .
2.As a variable resistor :When potentiometer is used as a rheostat, it should be taken into two end devices.Thus within the limited travel range of potentiometer,which can be gotten smooth, continuously changable resistance value.
3.As the current controller :Potentiometer is used as the current controller, one of the designate current output must be sliding contact terminal.
4.Application of potentiometers
•Linear displacement measurement
•Rotary displacement measurement
•Volume control
•Brightness control
•Liquid level measurements using floats
Some parts of our certificates
Advantage of choosing our company and products:
Our partners:
CHANGHONG
TAIWAN KEZHENGXIN ELECTRONICS CO.
XI’AN HONGXING ELECTRONICS CO.
JIALING MOTORCYCLE
KLS ELECTRONIC CO., LTD.
The Scope of Products:
The Work Flow: