Turning Groove carbide inserts

Cemented Carbide inserts for pipe cutter

sell directly from our factory

The best advantage of performance

The most best quality and lowest price for our Tungsten Carbide Turn-Groove inserts, We are sincerely want built nice long term cooperation relationship with you.

Advantages of our Turn-Groove carbide inserts: 

1.stable and trustable quality;

 
2.made from 100% virgin raw material;

 
3.all products go through in-process and final inspection;

4.free online technical service available;

5.Recommend Grade can be choose: YG6/YG6X/YG6A/YG8/YT5/YT14/YT15/YW1/YW2/YS25/YS30/YD15/YDS15/YC30S/YC40/YC45/YT798/YG813/ZP35 etc;

6. Application for:for cutting of stainless steel pipe, brass pipe and aluminum pipe;

7.Optional Types for your reference:   

                                                                               A.Blank surface:

                                                                   B.Pipe cutter with golden coating:

                                                                C.Pipe cutter assembly on the holder

Physical and mechanical properties of main grades:

1).The first choice of Grade for pipe cutter: YC40

2).The most classical of Type for pipe cutter:3.96402(6.5MM)

3).Our pipe cutter with suitable Grade that can withstand the impact, with strength design for cutting edge you had all the security in the world for cutting seamless steel pipe.

4).We have lots of stock can easily Supply for you by any time, With quickly delivery and price concessions for you.

Packing:

Packing product into paper box first,And then put into carton or wood box for transport.

Quality Control System:

Everything single piece will be inspected in and after production to make sure it can match your requests and we guarantee full payment returned if any quality problems.

Warm prompt:

The Notes below should be pay more attention when you are using our Tungsten Carbide cutter (tips/inserts):

1).Tungsten carbide materials is very hard and brittle, It’s very easy to broken during too much force or special force for the single part, Please pay more attention for the sharp edges.

2).The most part of our Tungsten carbide products is mainly made from Wolfram and Cobalt, with big density. When you transportation and stock, This freight must is carefully handled when loading.

3).Tungsten carbide products with different of coefficient of thermal expansion rather than steel and iron. In order to avoid stress concentration burst. Please attention suitable temperature when brazing.

4).Tungsten carbide products should be well stock during dry and non-corrosiveness of environment.

5).When tungsten carbide cutter during cutting processing, Is inevitably occur chip. Please prepare well with labour protection appliance before working.

6). In order to consider lifetime of machine tools and cutting tools,The correct use of coolant if you need it.

7).Please stop working when you find tungsten carbide cutter cracked during the cutting process.

8).When the tungsten carbide cutters getting dull and turn to lower strength after using long time, Do not repair or polish by nonprofessional staffs.

9).Proper collection with repair tungsten carbide cutters and chips, avoid to hurting other people.

Factory Show:

We are ZhuZhou Kerui Cemented Carbide Co.,Ltd that with ability of Research and development, Producing, Selling of private high and new technology enterprises.

We are land in ZhuZhou Carbide base with the newest and advantage of experience during our longterm research and development on tungsten Carbide materials. We are professional manufactrure mainly produce Tungsten Carbide products for all over the wold.