Excellent performance cemented carbide die
USD $0.1 - $1.6 /Kilogram
Min.Order:200 Kilograms
Zhuzhou Kerui Cemented Carbide Co., Ltd.
Excellent performance cemented carbide die
Product introduction of cemented carbide die
Cemented carbide dies are typically used to draw wire, rod, bar, and tube. Commonly drawn materials include steel alloys, aluminum alloys, and copper alloys.
Tungsten carbide drawing dies could ensure high precision and surface finish of high-speed drawn steel wire, tungsten wire and copper wire for a long time.
Our tungsten carbide drawing dies are available with bore sizes from 0.2mm to 120mm. We can supply the dies fully finished or rough cored - cased or uncased, to meet client's exact requirements.
Product types of cemented carbide die
Physical and mechanical properties of main grades:
Grade for carbide die | ||||||
ISO code | China grade | density | hardness | TRS | Application recommended | |
(g/cm3) | (HRA) | (MPa) | ||||
K10 | YG6X | 14.8-15.0 | 91.5-92.5 | 1800-2200 | For drawing steel and nonferrous wires or bars of less than Dia.6.00mm under not so much stress | |
K20 | YG6 | 14.8-15.0 | 90.5-91.5 | 1800-2200 | For drawing steel, nonferrous alloy bars of less than Dia.20.00mm under more stress and also for drawing tubes of less than Dia.10.00mm. | |
K30 | YG8 | 14.6-14.8 | 89.5-90.5 | 1900-2300 | For drawing steel and nonferrous bars less than Dia. 50.00mm and tubes less than Dia. 30.00mm. | |
K40 | YG15 | 14.0-14.2 | 86.5-87.5 | 2200-2600 | For drawing steel bars and tubes with a high reduction rate. |
Reference packaging for cemented carbide die
Interior packaging: paper box,
Exterior packaging: carton or wooden case.
Also could be customized.
Product advantages of cemented carbide die
1) fast drawing speeds;
2) No break, good wear resistance, long lifetime;
3) High precision of dimensions for a long time;
4) High polish of inner hole without pore;
5) Strong combination of pellets and steel case.
Tips for use of cemented carbide die:
1) should choose the suitable grade for different size of wires and rods;
2) Check the drawing machines carefully before use, no radius run-out allowed;
3) Clean the surface of drawing item before processing;
4) Apply good lubricates to optimize lifetime of drawing die;
5) Choose suitable reduction ratio according to size and material of drawing items;
6) Check the carbide drawing die regularly.
Company profile:
Zhuzhou Kerui Cemented Carbide Co., Ltd is a professional tungsten carbide manufacturer
located in Zhuzhou City, the world renowned cemented carbide base. Have been involved in this
field for over 10 years, we have reach experience in production and research of carbide products.
We are also an assessed supplier by Alibaba and BV.
Our tungsten carbide products are exported to USA, Canada, Russia, Romania, Italy etc.
Factory picture:
Production process:
Quality inspection instruments:
Quality control:
1. All raw materials are tested in terms of density, hardness and T.R.S before use.
2. Every piece of product goes through in-process and final inspection.
3. Every batch of product can be traced.
Guarantee:
Full payment refund if any quality problem.
Certificates:
Transportation mode:
By express, by air, by road, by railway, by sea etc.