Specifications

series magnetic level gauge is for onsite level indication, use float as measurement unit, the magnet
drive turned column showi

 magnetic level gauge is for onsite level indication, use float as measurement unit, the magnet
drive turned column showing the level without energy. It can work from low temperature to high
temperature, from vacuum to high pressure, high viscosity, corrosion and so on. It measure the level safely
and reliability. Under various environments to measure the liquid, the whole process of measurement
without blind spots, display eye-catching, intuitive readings, measuring range.

 

Products matching upper and lower limit switch output, remote alarm can be realized, limit control.

Products matching remote transmitter can be level, industry-bit signal into the two-wire 4-20mADC
standard signal, to achieve long-range detection, direction, recording and control.

According to the installation site in the container to provide side loading, top loading, top-mounted side
were three types. According to different working media, provide stainless steel, stainless steel lined with
PTFE, ABS, PP-R, PVC, UPVC and other materials, including stainless steel, PTFE lining, ABS, PP-R,
PVC, UPVC material for acid and alkali Corrosive media.

Products are widely used in electric power, petroleum, chemical, metallurgy, food and other industries in the
production process level measurement and control.
2.  Structure principle

 

Magnetic sub-level gauge is based on the buoyancy principle and the principle of magnetic coupling work.
Float tube with the liquid level in measuring the rise and fall and move up and down the permanent magnet
in the float through the magnetic coupling to drive the red, white cylinders flip 180°, liquid level gauge to
rise, turning from white to red column, a decrease of By the red to white, in order to achieve level
instruction.

 

Basic model:
Suitable for level measurement of liquid medium which working pressure less than 4.0MPa, and working
temperature lower than 200°C.

Anti-corrosion model:
It’s suitable for acid, alkali and many organic solvents. It use PTFE lined stainless steel, PPR, PVC as body
material.

Jacket model:
Applied to antifreeze, insulation and heating level measurement occasions. Jacket type: steam jacket, water
cycle jacket, vacuum jacket, electric heating jacket, and electric warming jacket.

 

High temperature high pressure model:
It’s suitable for high temperature and high pressure level measurement occasions. The maximum process
temperature is 520°C. The maximum working pressure is 32MPa.