Name: Telpo TPS550 All In One PC, Android Touch Screen POS Terminal for Barcode Scanner Finger Reader
Brand: Telpo
Availability: InStock

Product Details

Specifications

TPS550
1. All-in-one Android tablet
2. 7.0-inch Touch Screen pos terminal
3. Dual core 1.5GHz A9 Processor
4. Dual SIM Card

Product Description

Telpo TPS550 All In One PC, Android Touch Screen POS Terminal for Barcode Scanner Finger Reader

Application:

1. Registration: Biometric Verification of SIMs/Vistors Registration/Voting

2. Prepaid Airtime: Electoronic prepaid card/PIN-LESS Top-up/Calling card

3. Bill payment: Electricity/Water/Gas/DTH/TV Recharges/Internet/Broadband/Insurance/Charity

4. E-ticketing: Railway/Ait/Bus/Movie

5. Money Transfer: Deposit/Withdrawal/Remittance

6. Loyalty Program: Loyalty card/Rewards card/Points card/Advantage card/Club card

7. Lottery: Lotto game/Bingo game/Casino game/

8. O2O Shipping

Packaging & Shipping

Specification:

Processor	A9, CPU1.2GHz
Memory	1GB RAM, 8GB FLASH, Ext. TF(micro SD) card touch screen pos
OS	Android 4.2
Display	7’, TFT 800480;TFT1024600(Optional) touch screen pos
Keypad	12 alphanumeric keys, 7 function keys
Battery	Lithium Polymer rechargeable battery,7.4V, 2200mA, Li-ion. 7.4V, 2500mA, Li-ion(Optional)
Power Supply	Input:100-240VAC, 50Hz/60Hz,1.0A;output:12VDC, 2A
Dimensions(mm)	290(L)×219(W)×85(H) touch screen pos
Weight	1500g
Certification	CE touch screen pos
Card Reader	Magnetic card reader, Track 1/2/3, bi-directional swipe, ISO7810, ISO7811, ISO7812(Optional)
	Smart card reader, ISO 7816(Optional)
	Contactless card reader, ISO14443 Type A/B, Mifare®(Optional)
SAM Slots: 2 SAM Slots, ISO7816	(Optional) touch screen pos
SIM Slots	Single SIM
SIM Slots	Dual SIM(Optional)
Communications	GPRS/ Ethernet touch screen pos
Communications	WiFi/3G/4G/CDMA1x/Dial-Up(Optional)
Peripheral Ports	2 USB Host, 1 mini USB(OTG) , 1 RJ45
Peripheral Ports	Optional: RJ11, PS2, DB9(Optional)
Buzzer single tone beeper	Support touch screen pos
Digital Audiosynthesizer with built-in speaker	Support
Built-in Fingerprint Module	(Optional) touch screen pos
Built-in Camera (5 MP, Barcode reader 1D/2D)	(Optional)
Certificate camera(5MP, Take certificate photo for person)	(Optional) touch screen pos
Printer	Thermal graphic printer
Speed	18 lines/sec touch screen pos
Print paper width	58mm
Working Environment:	Temperature:0°C~50°C; R.H.: 10%~90% (non-condensing) touch screen pos
Storage Environment:	Temperature:-20°C~70°C; R.H.: 5%~95% (non-condensing)

Company Information

FAQ

Q1. How to check the software version
A: Turn on the device, it will show the software version number on the screen during startup.
Q2. How to enter factory test mode
A: (1) For some old version, when the device is under standby state, click keys *#55#, it will enter factory test mode
      (2) For new version, after press power on key, when the device is in startup, click the key "Cancel".
      It will show "Factory Mode", then input keys *#55#, and click key "Menu", then it will enter factory test mode.
      In factory test mode, you can test lots of hardware function such as test printing, test keypad, test LCD,
      test GPRS connection, test SMS and so on.
Q3. Can not Turn On
A: Check the power adapter, or try to change another workable power adapter.
      Check the battery, or try to change another normal battery.
      Remove the battery, and only connect the power adapter. Or only use battery, and do not connect power adapter to test it.
      Then check the Power Supply   Circuit and switch on/off the circuit according the test result.
      If the circuit has no problem, and it still can not turn on, please try to discharge.
Q4. Can not detect the SIM CARD
A: Please check whether the SIM card is installed well.
      Install the SIM CARD again.
      Change another SIM card
      Scrape the surface of the metal spring in the SIM CARD slot with knife.
      Check whether all the weld point of the SIM CARD slot is welded well or not.. If not, please weld it again.
      Replace the part of the SIM CARD slot.
Q5. Can not detect wireless signal
A: Please check whether it has GSM wireless signal in this place. If it has no GSM wireless signal or the signal is very weak, please try to test the terminal in another place with good GSM wireless signal.
      Otherwise, please open the shell of the device, and check if the antenna is connected well.
Q6. Print unconventionality
A: If it can't print, or has other print problem, please check the problem device according to following steps:
      (1). Open the shell of the POS.
      (2). Clean the printer header with ethanol.
      (3). Check the connector cable
      (4). Disconnect the cable, and clean the connector of the cable
      (5). Reinstall, and test it again.
Q7. Print blurred
   A: If it prints out blurry receipt, please do following steps.
      (1). Clean the print header
           Maybe it has some carbon accumulation on the print header.
      (2). Check whether the print header installed well or not
           Open the cover of the POS. Dismantle the print header.
           There are two spring button on the print header

Q8. Not feed paper
A: The POS does not feed paper during printing. But it can print out the receipt if you pull out the paper while printing.
(1). Check whether the paper installed well or not.
(2). Check the wheel of the roller
Check the wheel. If the gear wheel becomes bad or broken, please replace the roller.
(3). Check the wheel of the print header
Check the wheel. Is there anything block the wheel running? If yes, please clean it.
If the gear wheel becomes bad or broken, please replace print header.
(4). Test print without paper
Do not install paper, blot out the light sensor for pretending it from installing paper. Then try to print, check whether the wheel can run or not. If the wheel does not run, try to replace print PCB board, or try to replace the print head.