Vacuum Working Table Door CNC Router Wood Engraving
USD $14,200 - $15,000 /Set
Min.Order:1 Set
Vacuum Working Table Door CNC Router Wood Engraving
1.Brief Introduction:
ATC CNC Router is widely used in furniture, decoration, industrial equipment parts, music instruments, molds, arts &crafts, building models, and advertisement engraving and cutting.
2.Picture of CNC Router Wood Engraving:
3.Technical Parameters:
Model Name | CNC-WRS1325 | CNC-WRS1530 | CNC-WRS2030 | CNC-WRS2040 |
Working Area | 1300*2500*190mm | 1500*3000*190mm | 2000*3000*190mm | 2000*4000*190mm |
Lathe Bed | welded | |||
Beam | Aluminum Alloy | |||
X Y Transmission | Imported Square Rail | |||
Z Transmission | Imported Ball Screw | |||
Spindle Motor | 5.5KW ATC water cooling | |||
Spindle Speed | 6000-24000rpm | |||
Inverter | 11KW | |||
Control System | DSP | |||
Typeset Software | Type 3(English)/Ucancam | |||
Motor | Japanese Yaskawa Servo System 850W | |||
Driver | Leadline882 | |||
Vacuum | Tube and Lathe Table | |||
Vacuum Pump | TONGYOU 5.5KW(Water Cooling) | |||
Max Moving Speed | 60000mm/min | |||
Max Engraving Speed | 25000mm/min | |||
Positioning Accuracy | <0.04/300mm | |||
Lathe Table | Plastic Sheet | |||
Dust Collector | 3.0KW | |||
Voltage | AC380V/50HZ | |||
Tool Diameter | 2-----20 | |||
Tool | Tool magazine capacity of 8 tools, changing tools only takes 8 seconds | |||
Application | mainly used for production of closet doors, solid wood processing, furniture, etc. Also can be used for cutting and production of MDF | |||
Warranty | One year (Spindle motor is half year. The blades, sensor, power cable are expendables, not include.) | |||
Payment | 50% prepayment by T/T, the balance to be paid upon receipt of B/L copy | |||
Advantage | Simple design, Complete Function | |||
Optional Equipment | ||||
Name | Specification | |||
Operation system | SYNTEC control system | |||
LNC control system | ||||
Spindle Motor | Italy 9.0KW HSD air cooling | |||
Protection Device | Limitation switch Dust collecting system |
4.Features of CNC Router Wood Engraving:
1) The bed lathe is welded by thick wall seamless cast steel. It is analyzed and designed with FEA and worktable is more reasonable and stable.
2) All of the bearings, ball screw, linear square rails, etc are lubricated and maintained automatically by the concentrate control system of the machine.
3) The main parts of the machine are all top-grade brands of the world, such as Japanese Yaskawa servo system.
5.Main Parts of CNC Router Wood Engraving:
6.Samples Show:
7.Factory Show:
8.Customer Visiting Show:
9. Why Do Clients Choose Us?
1) At the same quality grade, our price is better:
a) Since we are manufacturer, we produce machines on large scale. Our profit mainly comes from order quantity, not from unit machine.
b) We own advanced production equipment, high efficiency and low production cost, so we can provide you with the best price for machines.
2) At the same price level, our service is better:
a) Before purchasing, please feel free to talk with us through trademanager message tool. Our service staff will recommend the proper model to fit your demand best.
b) After-sale, we guarantee the machine in 12 months dating from you receiving the machine. During warranty period, if some part is broken due to manufacturing defect, we will send you a new one to replace it by free cost and free shipment.
c) We will provide you free technical supporting during the whole lifespan of the machine.
We promise to solve any problems for you in 24 hours!