Magnetostrictive Position Sensor, Level Sensor, Magnet Sensor

H model - Hydraulic Rod

H model is designed for hydraulic cylinder. Hydraulic body is made by stainless steel; it can be inserted directly into hydraulic cylinder. Electronic component and hydraulic body are modular design which can be detached easily; Hydraulic fluid doesn't need to be withdrawn when doing sensor calibration or replacement. This design greatly reduces the down time and improves efficiency.

Order Code	194
Output	CANBus
Measurement Type	Linear displacement
Data Protocol	CANopen: CIA Standard DS-301 V3.0
	CANbasic : CAN 2.0A
Baud Rate	Baud rate : 1000 800 500 250 125 50 20 Kbit/s
	Cable length : <25 <50 <100 <250 <500 <1000 <2500 m
Resolution	CANopen CANbasic
	5μm 2μm 5μm 2μm
	0.5mm/s 0.2mm/s 1.0mm/s 0.1mm/s
Resolution	Displacement : 1 / 2 / 5 / 10 / 20 / 50 / 100 μm
Repeatability	< +/-0.001% of full scale (minimum +/-2.5μm)
Non-Linearity	< +/-0.01% of full scale (minimum +/-40μm)
Update Time	0.5 ms up to 1200 mm / 1.0 ms up to 2400 mm
	2.0 ms up to 4800 mm / 5.0 ms up to 7600 mm
Input Voltage	+24Vdc (20.4 - 28.8Vdc)
Input Protection	Polarity protection up to -30Vdc, Over voltage protection up to 36Vdc
Power Consumption	100mA (stroke range dependent)
Dielectric Strength	500Vdc (DC ground to machine ground)
Connector Type	D60 Male
Operation Temp.	-40 to 75 °C, Humility 90% non-condensing
Sealing	IP67 (with connector)
Shock Rating	100g single hit per IEC standard 68-2-27
EMC	Emission EN 68000-6-3, Immunity EN 61000-6-2, EN 61000-4-2/3/4/6

Installation

Packaging & Shipping

Payment Methods