Specifications

Hemodialysis Machine with follwoing adventures,
1,convenient maintenance&operation
2,precise instrument
3,healty,safe

AJ-2008B    High  Standard
Hemodialysis Machine

(Double Pump LCD Touch Screen)

 

Application

1,AJ-2008B haemodialysis machine is applicable for chronic renal failure and other blood purification

treatment.

2,This device should be used in medical units.

3,This device is specially designed, produced and sold for renal failure patients to receive haemodialysis,

which is not allowed to be used for other purposes.

Introduction

Size	380mm×400mm×1380mm (L*W*H)
Area	500*520 mm
Power Supply	AC220V, 50Hz / 60Hz, 10A
Input power	1500W
Back-up battery	30 minutes (optional)
Water input pressure	0.15 MPa   ~ 0.6 MPa, 21.75 P.S.I. ~ 87 P.S.I.
Water input temperature	10°C~ 30°C
Working environment	temperature 10ºC ~ 30ºC at relative humidity of no more than 70%.

 

 

Dialysate

Dialysate temperature: preset range 34.0°C~ 39.0°C

Dialysate flux: 300~800 ml/min

Dialysate concentration: 12.1 mS/cm ~ 16.0 mS/cm, ±0.1 mS/cm

Dialysate mixing ratio:can set variety ratio.

UF rate Flow range: 0 ml/h ~ 4000 ml/h

Resolution ratio: 1ml

Precision: ±30 ml/h

 

Extracorporeal Part

Venous pressure: -180 mmHg ~ +600 mmHg, ±10 mmHg

Arterial pressure : -380 mmHg ~ +400 mmHg, ±10 mmHg

TMP pressure : -180 mmHg ~ +600 mmHg, ±20 mmHg

Blood pump flow range: 20 ml/min ~ 400 ml/min(diameter:Dia.:6 mm)

Spare pump flow range: 30 ml/min ~ 600 ml/min(diameter: Dia.: 8 mm)

Resolution ratio: 1 ml

Precision: error range ±10ml or 10% of reading

Heparin Pump

Syringe size: 20, 30, 50 ml

Flow range: 0 ml/h ~ 10 ml/h

Resolution ratio: 0.1ml

Precision: ±5%

 

Sanitize

1.Hot decalcification :

Time: about 20 minutes

Temperature: 30~60°C, 500ml/min.

2.Chemical disinfection :

Time: about 45 minutes

Temperature: 30~40°C, 500ml/min.

3. Heat disinfection :

Time: about 60 minutes

Temperature: >85°C, 300ml/min.

Storage Environment Storage temperature should be between 5°C~ 40°C, at relative humidity of no more

than 80%.

Monitoring System

Dialysate temperature	preset range 34.0°C~ 39.0°C, ±0.5°C
Blood leak detection	Photochromic
Alarm when erythrocyte specific volume	0.32±0.02 or blood leak volume is equal or more than 1ml per liter of dialysate
Bubble detection	ultrasonic
Alarm when a single air bubble volume	more than 200µl at 200ml/min blood flow
Conductivity	acoustic-optic, ±0.5%