Product Details

Specifications

gold spiral groove
1.Non-power
2.Easy operation&low maintainence
3.High recovery,low price
4.CE&SGS&ISO

Gravity concentration equipment, gold spiral groove

Introduction of gold spiral groove :

The gravity spiral chute is made of light chlorine plastic and it is of anti-rust and water proof. The spiral chute is used for adjusting feeding size of the granularity.
With simple structure and large capacity, the gravity concentrator is of good performance. Chute is one part of the bevel process sorting, the pulp is in certain tilt slant and it will be pushed by stratified flow in order to be layered. The light mineral discharged is called fine concentrate and the heavy minerals which are discharged from the bottom of the slot bottom is yielding tailings.

working principle of gold spiral groove :

When using the chute when the vertical line need to be calibrated, the ore is sent to the feed mouth. adding additional water. After adjusting the concentration of mineral by adding additional water. The paddle streams down from the high place. In bevel velocity will produce a centrifugal force. Under the action of gravity and centrifugal force, ore and sand will be separated from each other. The tailings then flow into the tailings and the sand is drain away by pump to complete the whole process of the beneficiation.

Feature & Benefits of gold spiral groove:

Reasonable structure and small occupation area

High recovery, high efficiency, and precise separation,

Light in weight, rust and corrosion resistant;

Simple installation and Minimal maintenance requirements

Low operating cost and long operating life

Reliable running with minimal operator attention

Strong adaptability to fluctuation of feeding amount, density, size and grade;

Technical Specification of spiral chute:

Model		5LL-1500	5LL-1200	5LL-900	5LL-600	5LL-400
Outside dia(mm)		1500	1200	900	600	400
pitch(mm)		540,720	900,720,540	675,540,405	450,360,270	240,180
Pitch Dia Ratio		0.75,0.6,0.45	0.75,0.6,0.45	0.75,0.6,0.45	0.75,0.6,0.45	0.6,0.45
Lateral slope		9°	9°	9°	9°	9°
Maximum starts per column		4-2	4-2	4-2	3	2
Feeding Size(mm)		0.3-0.02	0.3-0.03	0.3-0.03	0.2-0.02	0.2-0.02
Feeding Density(%)		25-55	25-55	25-55	25-55	25-55
Capacity(T/H)		8-6	4-6	2-3	0.8-1.2	0.15-0.2
External Size	Length(mm)	1560	1360	1060	700	460
	Width(mm)	1560	1360	1060	700	460
	Height(mm)	5230	5230	4000	2600	1500
Weight (Kg)		800	600	400	150	50

Note: This specification is just reference, any changes are subject to the products. Double roller crusher:

If you want to get more information,please provide the following information:
1. Type of rock (granite, basalt, limestone, etc.)?
2. What is the maximum size of your stone?3. What size ranges of final product do you want to make?4. How many tons per hour do you want to be able to process?

Welcome to visit our factory !