Product Details

Specifications

3R Fine Raymond Mill
1.High ratio of grinding
2.Even final size
3.Simple structure
4.CE,ISO9001

China Hot Sale High Quality 3R Fine Raymond Mill

1. Description of Fine Raymond Mill:

1. Fine Raymond Mill is suitable for making powder equipment at high closed circuit circle from all kinds of mine, chemical industry, building material, metallurgy.

2. Fine Raymond Mill can mill quartz, feldspar, calcite, talc, barite, fluorite, rare-earth, marble, ceramic, bauxite, manganese ore, iron mine, copper, phosphate ore, etc, which is harder than seven degree and moisure is lower than 6%. The final size can be controlled from 0.044mm to 0.125mm, which equal with that from 100 mesh to 325 mesh though Pendulum crusher.

2. Structure of Fine Raymond Mill:

1.The whole plant of stone raymond mill is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system;

2. Compared with other milling plants, the stone raymond mill passing ratio achieves 99%, this is what other mill can not reach;

3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably;

4. Main parts of the whole plant are made from cast and steel of high quality. The techniques is so subtly that insures the durability of whole plant;

5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.

3. Working Principle of Fine Raymond Mill:

Firstly, raw material is crushed by jaw crusher to the size required, and then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder, evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind.

After this, the ground stuff is carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set’s airflow system is closely sealed up and circulated under condition of negative and positive pressure.

4. Maintenance and Repair of Fine Raymond Mill:

1. Prior to installation of the equipment, all the people who will be assigned to operate the equipment have to be technically trained to know the principle and rules of operation. Someone should be specially selected and put in charge of the operation.

2. To ensure normal operation of the equipment, a manual containing strict rules and procedures for its operation, maintenance and repair should be well prepared and followed. Tools, replacement parts for maintaining, repairing and lubricating oil and grease must be available for immediate use.

3. After a period of usage, the equipment should be checked, to replace worn-and-torn parts such as rollers, rings and shovels. Be sure to fasten connecting-bolts, nut collars to fix rollers properly. Be sure to lubricate the parts sufficiently.

4. Roller should be replaced after 500-hours use. To check and wash bearings, replace broken ones, then fill enough oil and grease (with oil-pump or grease-gun).

Main parameters of raymond mill

Technical Parameter/Type	3R1510	3R2115	3R2615	3R2715	3R3016	4R3216	5R4119	3R7826	3R8327	4R9531
Max Feeding Size(mm)	≤8	≤15	≤20	≤20	≤20	≤30	≤30	≤20	≤20	≤30
Finished Product Granularity(mm)	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044
Shift Output(Different Materials)(t)	1-10	1-18	2-25	2-28	3-35	3-45	5-70	2-28	3-30	3-38
Rotating Speed Of Central Shaft(r/min)	280	180	150	150	130	130	103	150	150	130
Grinding Ring Internal Diameters(mm)	Φ405	Φ640	Φ780	Φ830	Φ870	Φ970	Φ1280	Φ780	Φ830	Φ950
Grinding Roll Diameters(mm)	Φ150	Φ210	Φ260	Φ270	Φ300	Φ320	Φ410	Φ260	Φ270	Φ310
Height of Grinding Ring and Grinding Roll(mm)	100	150	150	150	160	160	190	150	150	170