Ore Dressing Equipment, buy Laboratory Spiral Concentrator Gold Ore Dress Processing on China Suppliers Mobile

Product Details

Specifications

Laboratory Spiral Concentrator:
1)Simple structure
2)Easy operation;
3)High separating efficiency;
4)ISO Certificate

Laboratory Spiral Concentrator Gold Ore Dress Processing

Laboratory Spiral Concentrator Introduction:

Spiral Chute is used to process iron, stannum, tungsten, tantalum, niobium, gold ore, colliery, monazite, rutile and zircon of the size between 0.3 and 0.02mm, metals and nonmetal minerals with enough proportion deviation.

Laboratory Spiral Concentrator Structure:

Spiral Chute is made up of feeder, feed chute, spiral flute, bracket, intercepting slot, and supporting frame, etc.

laboratory Spiral Concentrator Features:

•Reasonable structure and small occupation area

•High recovery, high efficiency, and precise separation,

•Light in weight, rust and corrosion resistant;

•Simple installation and Minimal maintenance requirements

•Reliable running with minimal operator attention

•Strong adaptability to fluctuation of feeding amount, density, size and grade.

Laboratory Spiral Concentrator Application:

Spiral chute is suitable for fine materials of 0.3-0.02 mm granularities, such as iron ore, ilmenite, chromite, pyretic, zirconite, rutile, monazite, xenotime, tungsten ore, tin ore, tantalum ore, colombite ore as well as other nonferrous metal, rare metal and nonmetal minerals of different proportions.

Laboratory Spiral Cocentrator Working Principle:

The sand pulp is first send to the two inlets of the spiral chute. After added water for appropriate pulp density, the pulp swirls down and generates a centrifugal force which separates the ores and sands. The ore concentrate flows into the hopper and is collected through a pipeline. The tailings are discharged by a sand pulp. Thus, the whole mineral process is finished.

Technical Specification:

Model		5LL-1500	5LL-1200	5LL-900	5LL-600	5LL-400
Outside dia(mm)		1500	1200	900	600	400
pitch(mm)		540,720	900,720,540	675,540,405	450,360,270	240,180
Pitch Dia Ratio		0.75,0.6,0.45	0.75,0.6,0.45	0.75,0.6,0.45	0.75,0.6,0.45	0.6,0.45
Lateral slope		9°	9°	9°	9°	9°
Maximum starts per column		4-2	4-2	4-2	3	2
Feeding Size(mm)		0.3-0.02	0.3-0.03	0.3-0.03	0.2-0.02	0.2-0.02
Feeding Density(%)		25-55	25-55	25-55	25-55	25-55
Capacity(T/H)		8-6	4-6	2-3	0.8-1.2	0.15-0.2
External Size	Length(mm)	1560	1360	1060	700	460
	Width(mm)	1560	1360	1060	700	460
	Height(mm)	5230	5230	4000	2600	1500
Weight (Kg)		800	600	400	150	50

Note: This specification is just reference, any changes are subject to the products.

Our service:

Mining machines design and manufacture.
Technical engineer is available to the construction site for installation instruction and trial operation.
Customization is available.