Specifications

1)automatic lead rail adopts crawler-type transmission
2)fabric appears flat or wavy effect
3)suitable for plant/arc ceiling

 

Structure diagram

 

 

 

 Principle Introduction 

 There are a  automatic lead rail on each side for  the Elixs canopy shade. The number of the motor driver is altered by the size of the area, usually we use  one, two or four 220V Elixs ones. The automatic lead rail adopts crawler-type transmission. The motors keep  the same speed,  as well as the track running speed, so that we can make sure the shade is opening or closing at the same time. With good  flexibility, the connect bar between the fabrics  supports the fabrics and makes sure that the fabric will not fall.  After unfolding the canopy, the fabrics will appear well-proportioned flat or wavy effect. The system can be designed to be either one-side opening or two-side mode.

 

System Design

 The Max. size of single canopy shade is 12M and  the widest 3M.   Every 50cm there is a transverse connecting rod, Which can be made  to be flat or arc canopy shade. The biggest driving area of double-motor or 4 motors respectively is 18 square meters and 30 square meters. Arc canopy shade driving area will be less, usually it’s only 70% of standard size. There is no tensile strength requirement for fabrics, so you can choose ordinary euphotic, diaphanous,Lightproof roller shutter fabric. According to  different occasions, you can choose manual switch control, infrared remote control,  wireless remote control and intelligent control. Both  single control and group control is available.