UHF RFID Impinj R2000 Reader Module For Handheld Reader
Negotiable /Unit
Min.Order:1 Unit
Shenzhen Vanch Intelligent Technology Co., Ltd.
UHF RFID Impinj R2000 Reader Module For Handheld Reader
Brief Introduction
l Adopt high performance Impinj UHF Reader chip IndyR2000
l Small dimension, low power, convenient to integrate into internal of handheld reader
Features
1, Full support protocols of ISO-18000-6B,ISO-18000-6C(EPC G2)
2, Working frequency: 865-868MH /902-928MHZ (can be customized)
3, Reading distance can reach 4 meters above, is best choice to apply RFID reader integration and development
Physical parameters:
Length (PCB length) mm | 55.5 mm |
Length (Including the RF connector) mm | 55.5 mm |
Width mm | 39.5 mm |
Height mm | 7.5 mm |
Operating Temp. | -20°C – +60 °C |
Storage Temp. | -20°C – +85 °C |
Operating Humidity | < 95% ( + 25 °C) |
Antenna connector
MMCX connector | 50 Ohm |
|
SMA connector | 50 Ohm | option |
Electrical parameters
| minimum | typical | Maximum |
Protocol | EPC global UHF Class 1 Gen 2 / ISO 18000-6C | ||
Frequency | 860MHz |
| 960MHz |
Voltage | 3.7V | 4.2V | 5V |
Operating Current (30dBm output) | 1.1A | 1.2A | 1.3A |
Standby current | 50mA | 60mA | 70mA |
Maximum output power |
| 33dBm |
|
Minimum output power |
| 20dBm |
|
Output power accuracy |
| +/-1DB |
|
Output power flatness |
| +/-0.2DB |
|
Antenna connector protection |
| Support |
|
Tag RSSI |
| Support |
|
Antenna impedance matching measurement |
| Support |
|
Dense reader mode (DRM) |
| Support |
|
Ambient temperature measurements |
| Support |
|
ESD protection |
| Multiple |
|