New product aged flooring chemical reagent wood flooring with wax oil finished

Size: 10-21mm thickness x 70-300mm width x 600-2200mm length

Jiangsu Shunhe Wood Floor Co., Ltd. is a leading manufacturer of many kinds of wood products in China, We are professional in engineered wooden flooring with over 14 years experience in this industry since we built the factory in 1996.

The specifications of engineered flooring with multilayer hardwood we produce are mainly as following:

Wood: Oak, Ash, Maple, Sapeli, Walnut, Elm, Kempas, Acacia, Teak, Cherry, Jatoba, Wenge

Dimension: L*T *W -- (RL)*(10/12/14/15/18/21/22mm)*(70/90/120/125/150/189/220/240/260mm) or to be ordered

Top veneer thickness: 0.6 / 1 / 2 / 3 / 4 / 6mm

Joints: 4 sides T&G with Micro bevel

Coats: UV face anti-scratch Aluminum Oxide finishing;

Moisture content : 8-10%

Grade: A / AB / ABC / ABCD / CD

Gloss: matt, semi-gloss, high-gloss

Surface: smooth, hand-scrape, wire brush, smoke, distress

Structure: Oak (or other wood)+ eucalyptus/ poplar/ hardwood 

MOQ: 500sqm   

Delivery time: 30-45 days again L/C at sight or deposit of T/T

Packing: Every piece is insulted by plastic film for anti-wet and anti-attrition. The pallet is shrink wrapped and strengthed 

Introduction of our company-Shunyang Group

Our company, SHUNYANG GROUP, specializes in manufacturing Wood products for more than 15 years. And it’s one of the top enterprises in our city, near Lianyungang Port. we have three factories in jiangsu provice and one sales office in shanghai:

plywood factory: producing plain plywood,melamine plywood,film faced plywood for any specifications.

MDF board factory:producing plain MDF board, melamine MDF board for any specifications.

engineered wood flooring factory: producing multilayer engineered wood flooring for any specifications.

Welcome to visit our multilayer engineered wood flooring factories and company.With the advance quality control system and more than 15 years experiences in producing and exporting wood products, we can offer you high quality engineered wood flooring with competitive price. We have many customers from all over the world,all our customers are satisfied with our products and service. We are rather a partner than a supplier for our customers in the most of time. The following are our equipments :

Kiln dry room

Hot press matchine

The HOMAGE

UV lacquer lines

The packing

The meeting with our clients globally

All of the products will undergo the following tests in our laboratory before sending to the ports :

(1)Abrasion Resistance-To check the abrasion of the finishing

(2)Boiling test-To test if delamination occurred
(3)Environmental Chamber Test-To check if crack or distortion occurred under extreme temperature and humidity
(4)Crosshatch Adhesion Test-To check the surface adhesion level.
(5)Formaldehyde Test-To make sure the formaldehyde emmision is matching the Europe or USA standard.
(6)Moisture content-To check the moisture percentage in the wood.